Skip to content
The number one comparison site for certification in the Netherlands

Transferring an ISO 27001 certificate to another certification body

You can transfer your ISO 27001 certificate to any certification body that has ISO 27001 in its accreditation. Sector codes play no role for ISO 27001. On 24 September 2026 CertificeerWijzer counted 23 certification bodies with an office in the Netherlands. Of these, 19 are accredited through the Dutch accreditation body. The other 4 are accredited only through the British UKAS. The new certification body does not carry out a separate transfer audit, but reviews your documents, including your scope and your Statement of Applicability. Your three-year period continues. If you also want NEN 7510, ISO 27701 or ISO 9001 with the same party, fewer certification bodies remain.

Compare certification bodies for ISO 27001
On this page
  1. Rules for an ISO 27001 transfer
  2. Certification bodies that may take over your ISO 27001 certificate
  3. Documents for an ISO 27001 transfer: scope and Statement of Applicability
  4. Audit days and costs of an ISO 27001 transfer
  5. Combining ISO 27001 with NEN 7510, ISO 27701 or ISO 9001
  6. ISO 27001 transfer around the recertification
  7. Comparing ISO 27001 certification bodies before you transfer

For ISO 27001 any certification body with the standard in its accreditation may take over your certificate, whatever your sector. But how do you transfer without starting over, and what does it cost? After reading this article you will know which rules apply, who may take over your certificate, which documents to prepare, what the audits cost, how much choice you have left with NEN 7510, ISO 27701 or ISO 9001 added, and when the best moment to transfer is.

Rules for an ISO 27001 transfer

An ISO 27001 transfer follows the same rules as any other transfer. Those rules are in Global ACI-TECH-3-002 (IAF MD 2). Under those rules the new certification body first reviews your documents. It decides before your next audit. And it keeps your expiry date. The steps are covered in transferring to another certification body. That page also covers the cases in which you start over after all.

A "transfer audit" is not part of those rules. The pre-transfer review is a review of paperwork. According to TECH-3-002 a visit beforehand is not an audit either. ISO/IEC 27006-1:2024 is the rulebook for certification bodies for ISO 27001. That standard has no chapter of its own on transferring. That is why TECH-3-002 applies here without additions. Your first audit with the new certification body is the surveillance audit or recertification. That was already scheduled anyway.

Certification bodies that may take over your ISO 27001 certificate

For ISO 27001 every certification body with ISO 27001 in its accreditation is a candidate. Here the accreditation does not apply per sector, as it does for ISO 9001. TECH-3-002 only requires this. Your certificate must fall within the accreditation of both your old and your new certification body. In addition, for ISO 27001 there are no sector codes (IAF codes) in the scopes of the Dutch accreditation body.

On 24 September 2026 CertificeerWijzer counted 23 certification bodies. They have an office in the Netherlands and an accreditation for ISO 27001. The Dutch accreditation register and the UKAS schedules provided that count. Of these, 19 are accredited through the Dutch accreditation body. The other 4 are accredited only through the British UKAS. When you transfer, the new certification body also checks whether the accreditation of your old certification body falls within the international agreements. Those agreements apply to the accreditation body of your old certification body.

Documents for an ISO 27001 transfer: scope and Statement of Applicability

For an ISO 27001 transfer the new certification body wants to see your certificate and your audit reports. Above all, it wants to know exactly what your ISMS covers. So prepare two documents that belong to this standard.

  • Scope. The description of what falls within your ISMS: which departments, locations, systems and services. The scope is on your certificate. It determines whether the transfer is possible. TECH-3-002 has the new certification body check whether your scope falls within its own accreditation.
  • Statement of Applicability. The list of controls from Annex A that you apply or exclude, with the reason (SoA). If your certificate mentions a version of that statement, send exactly that version.

The new certification body builds the audit programme on those documents. The programme applies to the years still to come. If you want to enlarge your scope when transferring, for example with a new location or service, state that in your request. That changes the audit time. Which other documents an ISMS requires is covered in the documents for ISO 27001.

Audit days and costs of an ISO 27001 transfer

With an ISO 27001 transfer you mainly pay for the audits that were already scheduled anyway. The new certification body calculates those itself with Annex C of ISO/IEC 27006-1:2024. That method differs from the table of Global ACI-TECH-3-004 (IAF MD 5), which ISO 9001 uses. The basis is the number of people working within your scope. The certification body then adjusts that with the factors the standard lays down for this.

Those factors leave room. As a result, the number of audit days can differ per quote. So ask which assumptions a certification body uses. Count on a day rate of €1,000 to €1,800 excluding VAT per audit day. How the audit time for ISO 27001 comes about is explained in the costs of ISO 27001. What the pre-transfer review costs is covered in transferring.

Combining ISO 27001 with NEN 7510, ISO 27701 or ISO 9001

If you also want to bring other certificates to the same certification body when you transfer, you choose from fewer parties. Not every certification body with ISO 27001 also has that other standard in its accreditation. On 24 September 2026 CertificeerWijzer counted this many certification bodies with ISO 27001 and:

CombinationCertification bodies
ISO 27001 only 23
ISO 9001 16
NEN 7510 10
ISO 9001 and NEN 7510 9
ISO 27701 8
ISO 9001, NEN 7510 and ISO 27701 5

Every certification body with NEN 7510 or ISO 27701 also has ISO 27001. Conversely, fewer than half of the certification bodies with ISO 27001 also have NEN 7510. For ISO 9001 your sector code also counts, because that standard is accredited per sector. So check whether the certification body may do ISO 9001 for your sector. What the difference is between ISO 27001 and NEN 7510 is covered in what NEN 7510 is. Whether one certification body for everything suits you better than two is covered in combining standards. That page also says what a combined audit saves.

ISO 27001 transfer around the recertification

At the recertification you start a new three-year period, with a new quote. So that is a logical moment to compare ISO 27001 quotes. Request them as soon as your surveillance audit in year 2 is behind you. The new certification body must decide on your certificate before the recertification starts.

Comparing ISO 27001 certification bodies before you transfer

Compare certification bodies that have ISO 27001 and your other standards in their accreditation. Compare them on the number of audit days and the assumptions behind them. Also compare them on the day rate, the separate items and the total up to and including your next recertification. At CertificeerWijzer a single transfer request goes to certification bodies that may certify your standards. That way you put their quotes for the rest of your period side by side.

Sources

  1. Global ACI-TECH-3-002 (M) version 1.0, Transfer of Accredited Certification of Management Systems (was IAF MD 2:2023) sys.global-aci.org
  2. UKAS F627, Transition Requirements and Gap Analysis ISO/IEC 27006-1:2024 (table of contents of the standard per chapter) ukas.com
  3. RvA, all accredited organisations (ISO/IEC 17021-1), scopes in the matcher database rva.nl

Frequently asked questions

Can I simply change certification body?

Yes. You can transfer a valid, accredited certificate to another accredited certification body at any time. This is set out in Global ACI-TECH-3-002 (formerly IAF MD 2). Read more about the rules

What happens to my current certificate?

You receive a certificate of your own from the new certification body, for the same standard. Your three-year period and your expiry date continue. Your old certification body may not suspend your certificate because you leave.

What does the new certification body need?

The new certification body reviews your documents in a pre-transfer review: is your certificate within both accreditations, is it valid, why are you transferring, were your audits done on time and are you dealing with a regulator. If a major nonconformity is still open, a visit beforehand follows. That visit is not an audit. Read how transferring works

How long does the transfer process take?

There is no fixed period for this. The new certification body first reviews your documents and then makes a decision, before any audit takes place. Only cancel your old contract once the new certificate is there, so you are never without a valid certificate. Read how transferring works

Are there costs involved in transferring?

Our comparison is free. The transfer itself can involve costs. Whether the pre-transfer review costs money differs per certification body, as do one-off costs for registration or the new certificate. If your contract with your old certification body is still running, it may charge you for the rest of the term. So compare the price of all audits up to and including your next recertification. Read what transferring costs

What if I have just had an audit?

Then you can simply transfer. Your three-year period and your expiry date continue. If a major nonconformity is still open after that audit, the new certification body first visits you beforehand. That visit is not an audit.

My current auditor knows our company well. Isn't that a waste?

That can be a reason to stay. If you transfer, the new certification body does not start from scratch: it receives your certificate, your audit reports, your open nonconformities and your complaints. Auditors do differ in how well they know your type of company. So ask in every quote which auditor you will get. Read why companies transfer

How much time and effort does transferring take?

Most of the work is done by the new certification body. You give your old certification body permission to pass on your data and have your certificate, your latest audit reports, your open nonconformities and your complaints ready. After that, the audits that were already planned simply continue. Read the full step-by-step plan

Is a cheaper certification body also less good?

Not necessarily. Every accredited certification body works to the same standard for certification bodies, ISO/IEC 17021-1, and is supervised by an accreditation body. Prices differ because of the day rate, separate items and the number of audit days the certification body calculates. Certification bodies do differ in how well their auditors know your type of company and how soon they have an audit date. Read how to compare certification bodies

What happens to open nonconformities when you transfer?

They move with you to the new certification body. A major nonconformity must be resolved and checked by the new certification body before the new certificate is issued. For a minor one it is enough that the new certification body accepts your plan to resolve it.

When is transferring not possible?

With a suspended or expired certificate, a certificate without accreditation, an audit not done on time or missing audit reports. You then start with an initial audit at the new certification body.

Is your question not listed?

Get in touch