Skip to content
The number one comparison site for certification in the Netherlands

Recertification of an ISO certificate

An ISO certificate is valid for three years. In the third year the recertification follows, before the expiry date. That audit takes place on site and checks whether your system has worked throughout the whole period. A major nonconformity must be resolved before the expiry date. If everything is completed in time, the certification body may let your new period run on from the old expiry date. For ISO 9001, 14001 and 45001 the recertification costs about two thirds of a new initial audit, calculated on your current size. If your certificate has expired, the certification body can still restore it within 6 months. After that at least a new stage 2 is needed. These rules are set out in ISO/IEC 17021-1, the standard for certification bodies.

On this page
  1. Recertification in the cycle of an ISO certificate
  2. What the auditor assesses in a recertification
  3. Deadlines for the recertification of an ISO certificate
  4. Audit days and costs of a recertification
  5. Expired ISO certificate after a missed recertification
  6. Recertification and the transition to a new version of the standard
  7. Comparing certification bodies at your recertification

After three years every ISO certificate expires, even if all surveillance audits went well. When do you need to have the recertification done, what does it cost, and what happens if you miss the expiry date? After reading this article you will know what a recertification is and what the auditor assesses, which deadlines apply, how many audit days you pay for, what happens if your certificate expires, how to include a transition to a new version of the standard and why this is a good moment to compare certification bodies.

Recertification in the cycle of an ISO certificate

A recertification is the audit in the third year that extends your certificate by three years. Every accredited certification body works according to ISO/IEC 17021-1, the standard with requirements for certification bodies. That standard sets out the cycle. First comes the initial audit in two stages. After that, a surveillance audit follows in the first and second year. In the third year the recertification follows, before the expiry date. How the initial audit and the surveillance audits work is explained in the certification audit.

The certification body already plans the recertification at the start. There has to be an audit programme for the whole three-year cycle, and the recertification is part of it. A scheme for a particular sector can prescribe a different cycle. For the common ISO standards it is three years.

What the auditor assesses in a recertification

In a recertification the auditor checks whether your system has worked throughout the whole three-year period. A surveillance audit looks at a part. The recertification looks at the whole. The audit takes place on site. ISO/IEC 17021-1 names three things the auditor assesses:

  • Effectiveness. Whether your system works for everything covered by your certificate.
  • Commitment of management. Whether management shows that it wants to make the system work and improve it.
  • Results. Whether you achieve your objectives with the system.

Beforehand the certification body reviews the reports of your surveillance audits. Has a lot changed at your organisation? Then it may first carry out a stage 1, just as in an initial audit. Think of a new location, a new type of work or new laws for your sector. Such a change can also lead to an extra audit in the middle of the cycle.

The decision on the new certificate is made by someone who did not carry out the audit. That person looks at the outcome of the recertification. How your system performed over the whole period also counts.

Deadlines for the recertification of an ISO certificate

Everything must be completed before the expiry date on your certificate. That applies to the audit, resolving nonconformities and the decision. ISO/IEC 17021-1 gives three rules for this:

  • Plan in time. The certification body plans the recertification so that your certificate can be renewed before it expires.
  • Major before the expiry date. Does the auditor find a major nonconformity (major)? Then you must resolve it before the expiry date. The certification body sets the deadline for this. For a minor nonconformity (minor) the certification body must have seen and approved your plan to resolve it before the decision.
  • Continuous expiry date. If you complete everything in time, the certification body may let your new expiry date follow on from the old one. If that happens, you do not lose months by having the recertification done early. Ask beforehand whether your certification body does this.

How long you get for a nonconformity is set out in the rules of your certification body. That is the document with the certification body's own rules. So plan the audit well before the expiry date. Then there is time left to resolve a major and to take the decision. Is the recertification almost due? Then ask your certification body for the date now.

Audit days and costs of a recertification

For ISO 9001, ISO 14001 and ISO 45001 a recertification costs about two thirds of a new initial audit. This is set out in Global ACI-TECH-3-004 (was IAF MD 5). The certification body calculates with your current size. So it is not two thirds of what your initial audit cost three years ago. Even for a small company a recertification is rarely shorter than one day.

An audit day costs €1,000 to €1,800 excluding VAT. Take an ISO 9001 company with 25 FTE and average risk. An initial audit there is 3 days. The recertification is then about 2 days, so €2,000 to €3,600 excluding VAT.

Has that company grown to 65 FTE? Then an initial audit is 5 days. Two thirds of that is 3.3 days. The certification body rounds to half days, so the recertification becomes about 3.5 days. That is €3,500 to €6,300 excluding VAT.

So report changes in time, such as more people or a new location. At every audit the certification body must update your details and review the audit time again. Do you have several locations? Then in the recertification the auditor again visits a full sample. If your system worked well throughout the cycle, that sample may be smaller. This is set out in Global ACI-TECH-3-001 (was IAF MD 1). For ISO 27001 and NEN 7510 the calculation rules are in ISO/IEC 27006-1. How the days per standard come about is explained in the costs of certification.

Expired ISO certificate after a missed recertification

If you miss the expiry date, you no longer have a valid certificate from that day. What you can still do depends on how long ago it was:

  • Within 6 months. The certification body can restore your certificate. That is possible if you still complete the recertification. The restored certificate takes effect on or after the date of the decision. The expiry date remains that of the old cycle. So you do not get back the months without a certificate.
  • After 6 months. Restoring is then no longer possible. The certification body carries out at least a new stage 2 before you get a certificate again.

A customer or contracting authority can see that you were without a certificate for a while. That shows when they look up your certificate at the certification body or in IAF CertSearch. Not every certificate is listed there. You also cannot transfer an expired certificate to another certification body. Restore it first, or start again with the new certification body. What that means is explained in transferring.

Recertification and the transition to a new version of the standard

If your recertification falls within the period of a transition to a new version of the standard, you can include the transition in it. For ISO 9001:2026 the transition may take place during a regular surveillance audit or recertification. This is set out in Global ACI-TECH-3-TR 2029-09-30. The transition must be completed before 30 September 2029. What changes in the new version is explained in the transition to ISO 9001:2026. Ask your certification body whether it may already certify against the new version.

Comparing certification bodies at your recertification

The recertification is a logical moment to compare certification bodies. You are starting a new three-year period anyway and you need a new quote anyway. You can then transfer without starting over: your cycle and your expiry date continue. The new certification body must, however, take its decision before the recertification begins. How that works is explained in transferring certification body. If you would rather stay, a comparison also gives you something to discuss with your current certification body.

At CertificeerWijzer you request quotes with one request from certification bodies that may take over your certificate. In every quote, ask for the days for the coming three years, including the recertification. Then you see what your next period really costs.

Sources

  1. IAS, summary of ISO/IEC 17021-1:2015 section 9 (process rules) iasonline.org
  2. Global ACI-TECH-3-004 (M) version 1.0, Determination of Audit Time (was IAF MD 5:2023) sys.global-aci.org
  3. Global ACI-TECH-3-001 (M) version 1.0, Multi-Site Organisation (was IAF MD 1:2023) sys.global-aci.org
  4. Global ACI-TECH-3-002 (M) version 1.0, Transfer of Accredited Certification (was IAF MD 2:2023) sys.global-aci.org
  5. Global ACI-TECH-3-TR 2029-09-30 (M) version 1.0, Transition Requirements for ISO 9001:2026 sys.global-aci.org
  6. ISO/IEC 27006-1:2024, edition 1 (product page) iso.org
  7. IAF CertSearch, Search and Verify ISO Certification iafcertsearch.org
  8. IAS, summary of ISO/IEC 17021-1:2015 section 8 (expiry date and recertification date on the certificate) cdn-v2.iasonline.org

Frequently asked questions

How long does it take to get certified?

For ISO 9001, a first certificate takes about eight months from scratch. Three to four months of that is waiting time at the certification body. If you request quotes straight away, that waiting time runs alongside your preparation. If you already work with fixed procedures, you can be done in four to five months. For other standards the lead time can differ.

What does certification cost?

You pay the number of audit days times the day rate of the certification body. That rate is usually between €1,000 and €1,800 per day, excluding VAT. How many days it takes follows per standard from a fixed rules document, based among other things on the number of employees. An ISO 9001 company with 10 FTE and average risk needs 4 days in total for the initial audit and two surveillance audits: €4,000 to €7,200 excluding VAT over the first three years. On top of that come separate items and your own time, and a consultancy if you hire one.

Do I need to hire a consultancy?

No, an advisor is not required for any ISO certification. An advisor mainly pays off if nobody in your company knows the standard, you have little time or you need the certificate by a fixed date. The advisor can take over the research and the writing. Running your system and the audit remain your work.

Which standard suits my company?

That depends on what you want to demonstrate. ISO 9001 is about quality, ISO 14001 about the environment, ISO 45001 about health and safety at work and ISO 27001 about information security. In Dutch healthcare you are legally required to work according to NEN 7510, and for AI there is ISO 42001. If a customer or tender asks for a certificate, check which standard it names. View all standards

How do I choose the right certification body?

Only choose a certification body that is accredited for your standard. For ISO 9001, ISO 14001 and ISO 45001 your sector must also be in that accreditation. Then compare the number of audit days and the price over three years, and ask which auditor you will get and when the first audit can take place. CertificeerWijzer only lists accredited certification bodies. Read what to look out for

What does accreditation mean and why does it matter?

Accreditation is the oversight of the certification body. An accreditation body assesses whether a certification body works competently and impartially, always for specific standards. A certificate within that accreditation is recognised by all accreditation bodies in the arrangement of Global Accreditation Cooperation (Global ACI), such as the British UKAS. A certificate without accreditation falls outside that recognition and cannot be transferred. Read how the certification chain works

Is your question not listed?

Get in touch