Skip to content
The number one comparison site for certification in the Netherlands

Combining several ISO standards in one audit

You can have two or more ISO standards assessed in one audit, such as ISO 9001, ISO 14001 and ISO 45001. This is called a combined or integrated audit. The certification body first calculates each standard separately and adds them up. From that total, 0 to 20% may be deducted. That is what Global ACI-TECH-3-008 (was IAF MD 11) says. You only get the full 20% if your systems are 80 to 100% merged, and 80 to 100% of the audit team may audit several standards. With little merging the deduction is zero.

On this page
  1. Combined audit of several ISO standards
  2. Fewer audit days with a combined audit
  3. One management system for several standards
  4. One certification body or several certification bodies for your ISO standards
  5. Industry certificates alongside an ISO standard
  6. Comparing certification bodies for a combined audit

If you have ISO 9001, ISO 14001 and ISO 45001 audited separately, you get an auditor on site three times for partly the same questions. Can you do it in one audit, how much does it save, and does everything then have to be with one certification body? After reading this article you will know what a combined audit is, how many audit days it saves, what your system must show for fewer days, when one certification body fits and when several do, and what applies to industry certificates.

Combined audit of several ISO standards

In a combined audit, one audit team assesses your company against two or more standards at the same time. The rules are in Global ACI-TECH-3-008, the successor to IAF MD 11 with the same content. It applies to every combination of management system standards, including when ISO 27001 is part of it. Every accredited certification body must follow it.

What is fixed in a combined audit:

  • Every requirement counts. The auditor assesses all requirements of every standard. So you do not get a lighter audit per standard.
  • Competent team. The team as a whole must be competent for every standard. The lead auditor must be qualified to audit at least one of the standards.
  • Report. You receive one report or a report per standard. Each nonconformity is listed under the standard it relates to.
  • Knock-on effects. If the auditor finds a nonconformity for one standard, the certification body considers what it means for the other standards.

Fewer audit days with a combined audit

A combined audit can save up to 20% of audit days, but only if your systems are genuinely merged. The certification body first calculates each standard separately, with all the rules of that standard. Those days are added up. From that total the certification body may deduct at most 20%. How a standard is calculated separately is explained in the costs of certification.

How much of that 20% is deducted follows from a fixed table in TECH-3-008. That table is part of the rules and is therefore not an example. The table looks at two things:

  • Merging. How far your systems have been brought together, as a percentage. The certification body determines this.
  • Auditors. How many of the certification body's auditors may audit more than one of your standards, also as a percentage. TECH-3-008 gives a formula for this.

In the table, each row shows how far your system has been merged. Each column shows how much of your audit team may audit several standards. The cell shows what percentage of the days is deducted.

In each cell: fewer audit days
Share of the audit team that may audit several standards
How far your systems are merged 0-20%20-40%40-60%60-80%80-100%
80-100% 0%5%10%15%20%
60-80% 0%5%10%15%15%
40-60% 0%5%10%10%10%
20-40% 0%5%5%5%5%
0-20% 0%0%0%0%0%

You only get the full 20% in one cell: a system that is almost entirely merged, and a team that may audit almost all standards.

Take a company with 30 FTE, average risk and average complexity that combines ISO 9001, ISO 14001 and ISO 45001. Separately that is 4, 5.5 and 5.5 days for the initial audit, 15 days in total. Is the system 60 to 80% merged and does the team come out at 50%? Then, according to the table, 10% is deducted: 1.5 days.

The full 20% saves 3 days. The day rate is between €1,000 and €1,800 excluding VAT per audit day. Those 3 days are therefore €3,000 to €5,400 excluding VAT on the initial audit.

At every surveillance audit and at the recertification, the certification body checks whether your system is still merged to the same extent. That shows whether the number of days is still correct.

The gain can turn out smaller in two ways. A combination can also take more time, because a combined audit is more complex than a separate one. In addition, the reduction a certification body gives for one standard because you already hold another certificate no longer applies. That reduction is then already included in the deduction for the combination. This is laid down in Global ACI-TECH-3-004 (was IAF MD 5).

One management system for several standards

How many days are deducted depends mainly on how far you have merged your systems into one management system. TECH-3-008 lists seven characteristics. The more of them apply to you, the higher the certification body rates your merging:

  • Documents. One set of documents and work instructions for all standards.
  • Management review. One management review that looks at the strategy of the whole company.
  • Internal audit. One approach to the internal audits.
  • Policy and objectives. One approach to policy and objectives.
  • Processes. One approach to the processes of the system.
  • Improvement. One approach to nonconformities, measurements and improvement.
  • Management. One allocation of tasks and responsibilities.

Your people count too. If they can answer questions about more than one standard, the audit goes faster. The time saving lies in one opening and one closing meeting, one report, less travel time, less consultation within the team and assessing at the same time what the standards share, such as document control.

In your request you state how far your systems have been merged. In stage 1 the auditor checks this. The certification body can then adjust the number of days. A high estimate in the request therefore only results in fewer days if the system lives up to it. The merging is a judgement by the certification body. If you think the estimate comes out too low, show the certification body which of the seven characteristics apply to you. How to build such a system, with or without a consultant, is explained in implementation support.

One certification body or several certification bodies for your ISO standards

If you want one combined audit, you need a certification body that has all your standards in its accreditation. For ISO 9001, 14001 and 45001 that accreditation must also include your sector code (IAF code), and per standard. On 24 September 2026, CertificeerWijzer counted in the Dutch accreditation register and the UKAS schedules how many certification bodies with an office in the Netherlands may certify a combination. Whether they cover your sector is not included in this count:

CombinationCertification bodies
ISO 9001 and ISO 14001 18
ISO 9001, ISO 14001 and ISO 45001 12
ISO 9001 and ISO 27001 16
ISO 27001 and NEN 7510 10

Having everything with one certification body fits if you have one system. You then get fewer audit days, one planning and one point of contact. There is also a downside. If, after a combined audit, one certificate is suspended or withdrawn, the certification body must assess what that means for your other certificates.

In other cases it is actually smarter to spread your certificates. For example if your systems run separately from each other, so that few days are deducted anyway. Or if a certification body knows your sector much better for one standard than for the other. You then miss out on the deduction on the days. On the other hand, you choose per standard the auditor who best understands your work.

Are your certificates currently with different certification bodies? Then you can bring them together by transferring one or more of them. That can be done without starting over, because your cycle continues. How that works is explained in transferring certification body. TECH-3-008 does not deal with expiry dates that do not line up. Ask the certification body in the quote how it aligns them.

Industry certificates alongside an ISO standard

TECH-3-008 may also apply to industry schemes, unless that scheme itself prohibits it. For industry certificates such as VCA and the Safety Culture Ladder, the scheme therefore determines whether you can combine them with an ISO standard in one audit. The scheme also determines whether days are then deducted. Ask the certification body before you plan the audits together.

Comparing certification bodies for a combined audit

In a combined audit, quotes differ on two points that you only see if you ask about them. The first point is how highly the certification body rates your merging. The second is how many of the auditors may audit several standards. So ask in every quote for the days per standard separately, the total and the percentage the certification body deducts from it.

At CertificeerWijzer, one request goes to certification bodies that may certify all your standards. That way you see their days and their deduction side by side.

Sources

  1. Global ACI-TECH-3-008 (M) version 1.0, Application of ISO/IEC 17021-1 for Audits of Integrated Management Systems (was IAF MD 11:2023) sys.global-aci.org
  2. Global ACI-TECH-3-004 (M) version 1.0, Determination of Audit Time (was IAF MD 5:2023) sys.global-aci.org
  3. RvA, all accredited bodies (ISO/IEC 17021-1), scopes in the matcher database rva.nl
  4. UKAS, Introduction to the UKAS Digital Accreditation Schedule ukas.com

Frequently asked questions

How long does it take to get certified?

For ISO 9001, a first certificate takes about eight months from scratch. Three to four months of that is waiting time at the certification body. If you request quotes straight away, that waiting time runs alongside your preparation. If you already work with fixed procedures, you can be done in four to five months. For other standards the lead time can differ.

What does certification cost?

You pay the number of audit days times the day rate of the certification body. That rate is usually between €1,000 and €1,800 per day, excluding VAT. How many days it takes follows per standard from a fixed rules document, based among other things on the number of employees. An ISO 9001 company with 10 FTE and average risk needs 4 days in total for the initial audit and two surveillance audits: €4,000 to €7,200 excluding VAT over the first three years. On top of that come separate items and your own time, and a consultancy if you hire one.

Do I need to hire a consultancy?

No, an advisor is not required for any ISO certification. An advisor mainly pays off if nobody in your company knows the standard, you have little time or you need the certificate by a fixed date. The advisor can take over the research and the writing. Running your system and the audit remain your work.

Which standard suits my company?

That depends on what you want to demonstrate. ISO 9001 is about quality, ISO 14001 about the environment, ISO 45001 about health and safety at work and ISO 27001 about information security. In Dutch healthcare you are legally required to work according to NEN 7510, and for AI there is ISO 42001. If a customer or tender asks for a certificate, check which standard it names. View all standards

How do I choose the right certification body?

Only choose a certification body that is accredited for your standard. For ISO 9001, ISO 14001 and ISO 45001 your sector must also be in that accreditation. Then compare the number of audit days and the price over three years, and ask which auditor you will get and when the first audit can take place. CertificeerWijzer only lists accredited certification bodies. Read what to look out for

What does accreditation mean and why does it matter?

Accreditation is the oversight of the certification body. An accreditation body assesses whether a certification body works competently and impartially, always for specific standards. A certificate within that accreditation is recognised by all accreditation bodies in the arrangement of Global Accreditation Cooperation (Global ACI), such as the British UKAS. A certificate without accreditation falls outside that recognition and cannot be transferred. Read how the certification chain works

Is your question not listed?

Get in touch