Skip to content
The number one comparison site for certification in the Netherlands

ISO 14001 requirements by clause

The requirements of ISO 14001 are in clauses 4 to 10 of the standard. Those clauses cover context, leadership, planning, support, operation, evaluation and improvement. The edition that applies now is ISO 14001:2026, the fourth edition, which was published in April 2026. Certificates on ISO 14001:2015 remain valid until 30 April 2029. The heart of the standard is clause 6: your environmental aspects and your environmental rules determine your risks, your objectives and your working arrangements. ISO 14001 has no requirements that you exclude as not applicable. You draw the boundary with your scope, and within it everything you have influence over counts.

Compare certification bodies for ISO 14001
On this page
  1. Structure of the ISO 14001 requirements
  2. Current edition of ISO 14001
  3. What you keep inside or outside your ISO 14001 certificate
  4. ISO 14001 requirements and the choice of your certification body

ISO 14001:2026 is the fourth edition of the standard for environmental management. What does a company have to arrange for it in practice, and what does the auditor pay attention to? After reading this article you will know how the requirements are structured, what each clause asks of you, which edition applies, what you keep inside or outside your certificate and how the requirements affect your choice of certification body.

Structure of the ISO 14001 requirements

The core of ISO 14001 is two lists: how your work affects the environment and which environmental rules you must comply with. On those lists you build your objectives, your working arrangements and your checks. The requirements for this are in clauses 4 to 10 of the standard. They say what you must arrange. How you do that is up to you. The seven clauses have the same structure as other ISO management system standards, such as ISO 9001 and ISO 45001. That means you can combine them in one system.

Annex A at the back of the standard explains how to read the requirements. That annex does not add any requirements itself. The standard maps the clauses onto the cycle of planning, doing, checking and adjusting (PDCA). The standard does not prescribe any environmental performance. You set your own objectives, within the rules that apply to you. Which documents you have to record is in the mandatory documents for ISO 14001.

Clause 4 of ISO 14001: context of your organisation

Clause 4 asks that you know the environment you work in. You determine which matters inside and outside your company affect your environmental management system. These also include environmental conditions, such as climate change, the availability of raw materials, biodiversity, the health of ecosystems and pollution. You look in two directions. How does your work affect the environment? And how does an environmental development affect your company? Think of drought for a grower or scarcity of a raw material.

You also determine who has an interest in your environmental performance, such as neighbours, customers, the municipality and the omgevingsdienst (regional environmental enforcement agency). You determine which of their requirements you must comply with. Then you record what falls under the system. That is called the scope. In doing so you consider what influence you have on the whole life cycle of your products and services, from raw material to waste.

Clause 5 of ISO 14001: leadership

Clause 5 places the environmental management system with top management. Management draws up the environmental policy and assigns who is responsible for what. The policy contains three fixed commitments. The first is that you protect the environment and prevent pollution. The second is that you fulfil your obligations. The third is that you keep improving your environmental management system. The policy is known to your employees and available to anyone who asks for it.

The auditor checks whether those commitments are there. The auditor also asks top management how the environment counts in decisions, such as an investment or a new customer.

Clause 6 of ISO 14001: planning

Clause 6 is the heart of the standard. In the 2026 version it builds up in a fixed order:

  • Environmental aspects (6.1.2). You determine how your activities, products and services affect the environment, such as energy, waste, emissions, discharges or noise. You choose criteria to determine which aspects weigh heavily. The standard calls those heavy aspects significant.
  • Compliance obligations (6.1.3). You establish which laws, permits and agreements you must comply with. You also know how they apply to your environmental aspects.
  • Risks and opportunities (6.1.4). The risks and opportunities for your system follow from the first two steps.
  • Planning actions (6.1.5). You choose which actions and measures you take.
  • Environmental objectives (6.2). You set objectives and plan how you will achieve them.
  • Planning of changes (6.3). This part is new. Before you change something, such as a new supplier, raw material, machine or site, you assess the consequences for your environmental management system.

For a small construction or installation company this remains manageable. The overview of sector codes names noise, waste water and energy as typical environmental aspects for construction. Then start your first list with those three. On your second list you put the rules that go with them.

For the environmental rules the auditor checks whether your list is complete. The auditor also pays attention to whether you know all the authorities that make rules for you, such as Europe, central government, the province, the water authority and the municipality. EA-7/04 requires this. That is the mandatory European document for ISO 14001 certification bodies. The auditor does not approve your list as definitive. That responsibility remains with you. An objective such as "more economical with energy" is too vague. "Gas consumption per square metre 10% lower than last year" can be measured.

Clause 7 of ISO 14001: support

Clause 7 is about what you need to make the system work. That means people, resources and knowledge. You ensure that people are competent for work that affects the environment. A driver who transports hazardous substances is an example of this. You ensure that everyone knows the environmental policy and knows what their own work does to the environment. You arrange communication within your company and externally. Externally you also communicate what your environmental rules require of you, such as a notification to the omgevingsdienst. Finally, you control the documents you record.

Clause 8 of ISO 14001: operation

Clause 8 asks that you plan and control your work so that you comply with your environmental rules and achieve your objectives (8.1). You record the conditions under which a process must run. An example is the limit value for a discharge. Work that you outsource also falls under your control. In addition you are prepared for an emergency, such as a leak, a fire or a gas leak (8.2). You know how you will respond.

Here the auditor walks around. The auditor looks, for example, at the storage of oil or chemicals. An employee is asked what they do if something leaks.

Clause 9 of ISO 14001: performance evaluation

Clause 9 asks that you check for yourself whether the system works. You measure your environmental performance, such as consumption, waste and emissions (9.1.1). A separate subclause covers the evaluation of compliance (9.1.2). You regularly assess whether you comply with all your rules and record the outcome. In addition you hold an internal audit (9.2). In the management review management checks whether the system works and what needs to improve (9.3). In the 2026 version that subclause has separate parts for what goes in and what comes out.

The auditor does not carry out a compliance inspection. That is the regulator's job. The auditor does check whether you have assessed your compliance completely. The auditor often follows a trail. That trail starts at a significant environmental aspect and continues to the rule that goes with it and your measurement. Or the auditor starts at a permit requirement and looks for the matching aspect.

Clause 10 of ISO 14001: improvement

Clause 10 asks that you keep improving and tackle errors at the root cause. Do you exceed a limit value or does a complaint come in from the neighbours? Then you solve it immediately. You find out why it happened. You take a measure that prevents recurrence. After that you check whether that measure worked.

Current edition of ISO 14001

The edition that applies now is ISO 14001:2026, the fourth edition. ISO published it in April 2026. It replaces ISO 14001:2015 and the 2024 amendment on climate change. ISO says that the new version builds on the existing structure. The layout is clearer. A certificate on ISO 14001:2015 remains valid until 30 April 2029. What differs between the two versions is in the transition to ISO 14001:2026. In the Netherlands you buy the standard from NEN (the Dutch standardisation institute), as NEN-EN-ISO 14001:2026, also in Dutch.

What you keep inside or outside your ISO 14001 certificate

ISO 14001 has no requirements that you may exclude as not applicable. That is different from ISO 9001. You draw the boundary with your scope. You choose which locations and activities fall under the certificate. Within that boundary all requirements apply to all environmental aspects that you can control or influence. That is stated in clause 1 of the standard. So you can start with one site. What falls within the boundary falls entirely under the system.

The auditor wants to see two points here:

  • Outsourced work. Do you have others do part of your work, such as waste removal or maintenance? Then that remains under your control. You cannot keep it outside your system because someone else does it.
  • Influence in the supply chain. You also look at what happens before and after your link in the chain, such as purchasing and disposal. You do not have to control everything. You do show where you have influence and what you do with it.

ISO 14001 requirements and the choice of your certification body

Your scope determines what will be stated on your certificate. In that way it also determines which certification body may certify you. For ISO 14001 a certification body is approved per sector. That works through the sector codes (IAF codes) in the accreditation. The overview of those codes in Global ACI-TECH-3-021 (IAF ID 1) gives the environmental aspects that often play a role per code. For transport (code 31) these are oil storage, energy, hazardous substances and emissions. The certification body's auditors must know the environmental rules of your sector and location. EA-7/04 requires this.

In your request for quotes, state which locations and activities fall under your system. Also state which environmental aspects are significant. Then every certification body calculates with the same data, because the costs of ISO 14001 depend heavily on those aspects. At CertificeerWijzer you do this once, for several certification bodies that may certify ISO 14001 for your sector.

Sources

  1. NEN, NEN-EN-ISO 14001:2026 nl, preview copy (foreword, introduction, clause 1 and table of contents) nen.nl
  2. NEN, New ISO 14001, a strong basis for sustainable business nen.nl
  3. ISO, ISO 14001:2026 (edition 4, April 2026) iso.org
  4. Global ACI-TECH-3-TR 2029-04-30 (M), Transition Requirements for ISO 14001:2026, version 1.0 sys.global-aci.org
  5. EA-7/04 M:2017, Legal compliance as a part of accredited ISO 14001:2015 certification tools.cofrac.fr
  6. IAF ID 1:2023, QMS and EMS Scopes of Accreditation, now Global ACI-TECH-3-021 iaf.nu