Skip to content
The number one comparison site for certification in the Netherlands

All about ISO 14001

ISO 14001 is the international standard for environmental management. You map the impact your work has on the environment and which environmental rules you must comply with. Then you control and improve it. The current version is ISO 14001:2026, which was published in April 2026. You obtain the certificate from an accredited certification body that may cover your sector. On 24 September 2026 CertificeerWijzer counted 18 certification bodies for ISO 14001 in the Netherlands. Of these, 16 may cover construction without restriction and 7 healthcare. The audit days depend on your FTE and on how significant your environmental aspects are. A transport company of 10 FTE falls in the middle category and needs 3 days for the first audit. An audit day costs €1,000 to €1,800 excluding VAT.

Compare certification bodies for ISO 14001
On this page
  1. What is ISO 14001?
  2. Who is ISO 14001 for and is it mandatory?
  3. What does ISO 14001 require?
  4. Steps and lead time of ISO 14001 certification
  5. What does ISO 14001 cost?
  6. Transferring and transition for ISO 14001
  7. Who may certify ISO 14001?
  8. Standards related to ISO 14001

Global ACI, the worldwide umbrella organisation of accreditation bodies, counts about 700,000 accredited ISO 14001 certificates. What does that standard actually ask of a company, and what does the certificate involve? After reading this article you will know what ISO 14001 is, who it is for, what it requires, how the process works, what it costs and which certification bodies may cover your sector.

What is ISO 14001?

ISO 14001 is the international standard for environmental management. With the standard you map the impact your work has on the environment. Think of energy, waste, emissions, discharges and noise. You also determine which environmental rules and agreements you must comply with. Then you control that impact and improve it step by step. The standard does not prescribe any environmental performance. A printing company and a construction company with very different emissions can therefore both be certified.

The standard names three outcomes your system must deliver. You improve your environmental performance. You fulfil your obligations. And you achieve your environmental objectives. In doing so you look at the whole life cycle of what you make or supply, from raw material to waste. That applies to everything you have influence over. The standard works with the cycle of planning, doing, checking and adjusting (PDCA). The current version is ISO 14001:2026, the fourth edition. It was published in April 2026. What changes is explained in the transition to ISO 14001:2026.

Who is ISO 14001 for and is it mandatory?

For most companies ISO 14001 is voluntary. The standard is there for every organisation, from an office to a chemical plant. Companies obtain it for these reasons:

  • Their own improvement. Many companies want to use less energy and raw materials themselves. The annual audit keeps them sharp in doing so.
  • Customers and supply chains. Large clients often ask their suppliers for it. That way they show that their supply chain also treats the environment with care.
  • Tenders. In a tender a government body may ask for evidence that your environmental management is in order. Article 2.97 of the Aanbestedingswet (Dutch Public Procurement Act) then names EMAS, the European eco-management scheme, or a certified standard such as ISO 14001. An equivalent certificate from another EU country also counts. Are you unable to obtain the certificate in time through no fault of your own? Then you may show with other evidence that your measures are equivalent. More about this requirement is in certificate for a tender.

A certificate is not proof that you never break an environmental rule. It shows that you have a working system to know your rules, comply with them and put things right when something goes wrong. That is how EA-7/04, the mandatory European document for ISO 14001 certification bodies, puts it.

What does ISO 14001 require?

ISO 14001 requires that you know, control and improve your impact on the environment. The requirements are in clauses 4 to 10 of the standard. In plain language they ask that you:

  • know the environment you work in, including which environmental developments affect your company, such as climate change;
  • record which impact your work has on the environment. Those impacts are called environmental aspects. You determine which of them are significant;
  • know which laws, permits and agreements you must comply with. The standard calls these compliance obligations;
  • set objectives and plan how you will achieve them;
  • control your work and are prepared for an emergency, such as a leak or fire;
  • check for yourself whether you fulfil your obligations, with an internal audit and a management review;
  • solve errors at the root cause.

Take a metalworking company with a permit for discharging rinse water. ISO 14001 then does not ask for a thick binder. The company shows that it knows and measures the limit value. It also shows what it does if a measurement comes out too high. All the requirements are in the requirements of ISO 14001. What you need to have on paper is in the mandatory documents.

Steps and lead time of ISO 14001 certification

Starting from scratch, an ISO 14001 process takes about eight months. That includes three to four months of waiting until a certification body has time. If you already work in a structured way, for example with ISO 9001, it takes four to five months. So request quotes straight away. Then the waiting time runs while you build your system. After that comes the certification audit in two parts. In stage 1 the auditor checks whether your documents are complete enough. In stage 2 the auditor comes to your site to check whether you do what you have recorded. From the decision on your certificate a three-year cycle runs, with two surveillance audits and a recertification. For ISO 14001 you must have checked yourself, before the audit, whether you comply with your environmental rules. Each step is in the steps to ISO 14001.

What does ISO 14001 cost?

A certification body charges the number of audit days times its own day rate. That rate is between €1,000 and €1,800 excluding VAT. At every accredited certification body the number of days follows from the same rules. They are in Global ACI-TECH-3-004 (IAF MD 5). For ISO 14001 two things count: your number of FTE and how significant your environmental aspects are. An office falls in the lightest category (limited), a demolition company in the heaviest (high). A transport company of 10 FTE falls in the middle category (medium) and needs 3 days for the initial audit. Each surveillance audit takes 1 day. Together that costs €5,000 to €9,000 excluding VAT in the first three years. The table and the categories are in the costs of ISO 14001.

Transferring and transition for ISO 14001

Do you already have an ISO 14001 certificate? Then you can transfer to another certification body without starting over. That is possible as long as your certificate is valid and not suspended. The new certification body must, however, have your sector code in its own accreditation. Global ACI-TECH-3-002 (IAF MD 2) requires this. The rules that apply to every standard are in transferring.

Do you have a certificate on ISO 14001:2015? Then you must transition to ISO 14001:2026 before 30 April 2029. That can be done during a regular surveillance audit or recertification. After 31 October 2027 an initial certificate can only be issued on the 2026 version. You need an audit for the transition anyway. So that is a logical moment to compare quotes.

Who may certify ISO 14001?

Only a certification body approved by the Dutch accreditation body or a foreign counterpart may certify ISO 14001 under accreditation. On 24 September 2026 CertificeerWijzer counted 18 certification bodies in the Netherlands with such an accreditation for ISO 14001 in the Dutch accreditation register and the UKAS schedules. All 18 hold that accreditation through the Dutch accreditation body. Four also hold an accreditation through UKAS, the British accreditation body.

For ISO 14001 your sector also counts. The Dutch accreditation body records the accreditation per sector code (IAF code). There are 39 codes. They are listed in Global ACI-TECH-3-021 (IAF ID 1). That document also gives examples of environmental aspects per code. For construction (code 28) these are noise, waste water and energy. For healthcare (code 38) these are contaminated waste and radiation. A certification body may only issue an accredited ISO 14001 certificate for the sectors in that accreditation. This is how the choice is distributed:

Reference date 24 September 2026Certification bodies
All 39 sectors 2 of the 18
At most 8 sectors 9 of the 18
Construction (code 28) 17 of the 18, of which 1 only for playground equipment
Business services (code 35) 16 of the 18
Transport (code 31) 14 of the 18
IT (code 33) 10 of the 18
Healthcare (code 38) 7 of the 18

A construction company can therefore go to 16 of the 18. A healthcare organisation can go to fewer than half of the certification bodies. Two of them have healthcare in their accreditation only through UKAS.

ISO 14001 alongside ISO 9001 at one certification body

All 18 certification bodies for ISO 14001 may also certify ISO 9001. Yet for 9 of the 18 the sector codes differ per standard. A certification body may therefore be allowed to issue your quality certificate but not your environmental certificate. Do you want to combine both standards in one audit? Then check for each standard whether your sector code is included.

Choosing an ISO 14001 certification body

Choose on these points. The calculation rules are the same, but the execution differs:

  • Sector. All your sectors are in the certification body's accreditation for ISO 14001.
  • Category. The certification body shows in which category of environmental aspects you are placed and why.
  • Total over three years. Compare the initial audit, two surveillance audits and the recertification together.
  • Auditor. Ask which environmental rules of your sector the auditors know.
  • Transition. The certification body may already certify against ISO 14001:2026, or says when that will be the case.

More points for choosing are in choosing a certification body. The full overview is in certification bodies. At CertificeerWijzer your request only goes to certification bodies that may certify ISO 14001 for all your sectors.

ISO 14001 shares its structure with other management standards. That way you can combine them in one system and one audit:

  • ISO 9001 is the standard for quality management. It too is accredited per sector.
  • ISO 45001 is the standard for occupational health and safety.
  • EMAS is the European eco-management scheme. The Aanbestedingswet (Dutch Public Procurement Act) names it alongside standards such as ISO 14001.
  • ISO 14004 and the ISO 14002 series provide guidance on implementing ISO 14001. There is no certificate for them.

Sources

  1. ISO, ISO 14001:2026 Environmental management systems (edition 4, April 2026) iso.org
  2. NEN, NEN-EN-ISO 14001:2026 nl, preview copy (introduction and clause 1) nen.nl
  3. Global ACI-TECH-3-TR 2029-04-30 (M), Transition Requirements for ISO 14001:2026, version 1.0, issued 4 September 2026 sys.global-aci.org
  4. Aanbestedingswet 2012 (Dutch Public Procurement Act), article 2.97 wetten.overheid.nl
  5. EA-7/04 M:2017, Legal compliance as a part of accredited ISO 14001:2015 certification tools.cofrac.fr
  6. Global ACI-TECH-3-004 (M) version 1.0, Determination of Audit Time (was IAF MD 5:2023), annex B sys.global-aci.org
  7. Global ACI-TECH-3-002 (M) version 1.0, Transfer of Accredited Certification of Management Systems (was IAF MD 2:2023) sys.global-aci.org
  8. IAF ID 1:2023, QMS and EMS Scopes of Accreditation (Issue 3, Version 2), now Global ACI-TECH-3-021 iaf.nu
  9. RvA, all accredited bodies for ISO/IEC 17021-1 rva.nl