ISO 9001 is the most widely issued certificate in the world. But what is it actually, and what does it involve? After reading this article you will know what ISO 9001 is, what it usually costs, which requirements come with it and how long the whole process takes.
What is ISO 9001?
ISO 9001 is the international standard for quality management. The standard sets out arrangements for how you plan, carry out, check and improve your work. That way customers get what you promise. The standard assesses how you work, not which product you make. A bakery and an engineering firm can therefore both hold the same certificate. In 2024 there were almost one and a half million valid certificates. That makes it the most widely used management standard in the world.
The standard revolves around the Plan-Do-Check-Act cycle (PDCA). You plan what you want to achieve and how. You carry it out. You measure whether it works. Then you adjust course. After that the round starts again. That applies to your company as a whole. It also applies to each process separately, from quote to delivery. The current version is ISO 9001:2026. It was published on 16 September 2026. What changes is explained in the transition to ISO 9001:2026.
Who is ISO 9001 for and is it mandatory?
For most companies ISO 9001 is voluntary. The standard is there for every organisation. The government only makes certification mandatory in certain cases. Companies obtain it for these reasons:
- Their own improvement. Many companies certify without anyone asking for it. The annual audit keeps them sharp. Their people then see that the work is in order.
- Customers and main contractors. Anyone who wants to be sure of consistent quality often asks their own suppliers for it.
- Tenders. For government contracts, certification is often a condition for taking part. An equivalent certificate from another EU country also counts. That is laid down in article 2.96 of the Aanbestedingswet (Dutch Public Procurement Act). Are you unable to obtain the certificate in time through no fault of your own? Then you may show with other evidence that your quality assurance is in order. More about this requirement is in certificate for a tender.
- Funders in healthcare. Health insurers and municipalities sometimes ask for a quality mark. That can be ISO 9001. It can also be a healthcare standard such as HKZ. Ask your funder which one it accepts.
What does ISO 9001 require?
ISO 9001 requires that you control your work and keep improving. The standard does not prescribe how. The requirements are in clauses 4 to 10 of the standard. In plain language they ask that you:
- know who your customers are, what they expect and which risks and opportunities are in play;
- record who is responsible for what, and that top management supports the system;
- provide the right people, knowledge and resources;
- control your work, from quote to delivery, including what you outsource;
- measure whether you achieve your objectives, with an internal audit and a management review. The latter is a fixed moment at which management checks whether the system works;
- solve errors at the root cause.
Take an installer who keeps getting the same complaint about forgotten handover documents. ISO 9001 then does not ask for a thicker manual. The installer records the complaint and looks for the cause. After that the installer shows that it no longer happens. All the requirements are in the requirements of ISO 9001. What you need to have on paper is in the mandatory documents.
Steps and lead time of ISO 9001 certification
Starting from scratch, an ISO 9001 process takes about eight months. That includes three to four months of waiting until a certification body has time. If you already work in a structured way, it takes four to five months. So request quotes straight away. Then that waiting time runs while you build. After that comes the certification audit. It consists of two parts. In stage 1 the auditor checks whether you are ready. In stage 2 the auditor assesses whether the system works in practice. From the decision on your certificate a three-year cycle runs. There is a surveillance audit within 12 months and a second one in the year after. In year 3 the recertification follows. Each step and what delays it is in the steps to ISO 9001.
What does ISO 9001 cost?
A certification body charges the number of audit days times a day rate. That rate is between €1,000 and €1,800 excluding VAT. At every accredited certification body the number of days follows from the same rules. Those rules are in Global ACI-TECH-3-004 (IAF MD 5). They look at the number of FTE, the risk of your work and a three-year cycle. That cycle consists of an initial audit, two surveillance audits and a recertification. A company of 10 FTE with average risk needs 2 days for the initial audit. Each surveillance audit takes 1 day. Together that costs €4,000 to €7,200 excluding VAT in the first three years. The table, the risk classes and how to check a quote are in the costs of ISO 9001.
Transferring and transition for ISO 9001
Do you already have an ISO 9001 certificate? Then you can transfer to another certification body at any point in the three years. You do not have to start over. The new certification body takes over your cycle. For ISO 9001 your sector code must be in that certification body's accreditation. Global ACI-TECH-3-002 (IAF MD 2) requires this. The rules that apply to every standard are in transferring.
Do you have a certificate on ISO 9001:2015? Then you must transition to ISO 9001:2026 before 30 September 2029. That can be done during a regular surveillance audit or recertification. It can also be done in a separate audit. From 31 March 2028 an initial certificate can only be issued on the 2026 version. You need an audit for the transition anyway. So that is a logical moment to compare quotes.
Who may certify ISO 9001?
Only a certification body approved by the Dutch accreditation body or a foreign counterpart may certify ISO 9001 under accreditation. On 24 September 2026 CertificeerWijzer counted 26 certification bodies in the Netherlands with such an accreditation for ISO 9001 in the Dutch accreditation register and the UKAS schedules. Of these, 25 hold their accreditation through the Dutch accreditation body. One holds it through the British UKAS. A certification body that may only certify a healthcare scheme based on ISO 9001 is not counted.
For ISO 9001 your sector also counts. The Dutch accreditation body records each accreditation per sector code (IAF code). ISO 9001 has 39 of them. They are listed in Global ACI-TECH-3-021 (IAF ID 1). Each code corresponds to a group of activities in the register of the KvK (Dutch Chamber of Commerce). In Europe the same numbering is also called the EA code. EA code 28 and IAF code 28 are both construction. A certification body may only issue an accredited ISO 9001 certificate for the sectors in its own accreditation. So the choice is smaller than the total suggests:
| Reference date 24 September 2026 | Certification bodies |
|---|---|
| All 39 sectors | 2 of the 26 |
| At most 8 sectors | 14 of the 26 |
| Construction (code 28) | 19 of the 26 |
| Healthcare (code 38) | 10 of the 26 |
| IT (code 33) | 15 of the 26 |
A construction company therefore has a wide choice. A healthcare organisation has less than half. What else plays a role in construction is in ISO 9001 in construction.
ISO 9001 for a company in several sectors
Does your company work in more than one sector? Then the certification body must have all the sectors covered by your certificate in its accreditation. Take a landscaper who also does groundwork. That landscaper falls under business services (code 35) and under construction (code 28). The landscaper therefore needs a certification body that may cover both. So state all your activities in your request. Do so even if your KvK registration names only one. The number of audit days also depends on this. According to TECH-3-004 the certification body determines the audit time for mixed work. In doing so it looks at the number of people per activity, with the risk that belongs to each activity.
ISO 9001 for a holding company or head office
For a holding company (SBI 64.2) or head office (SBI 70.10) the KvK code says nothing about the sector that counts. That code describes managing or financing other companies. Your certificate, however, covers the work of the operating companies. The certification body therefore looks at what those operating companies do. For a holding company above an installation company and an engineering firm, those are construction (code 28) and engineering services (code 34). So choose a certification body that has both sectors in its accreditation.
Choosing an ISO 9001 certification body
Choose on these points. The rules for calculating are the same, but the execution differs:
- Sector. All your sectors are in the certification body's accreditation.
- Audit days. The certification body shows how the number of days is arrived at, with the risk class.
- Total over three years. Compare the initial audit, two surveillance audits and the recertification together.
- Auditor. Ask what experience the certification body's auditors have in your sector. Also ask whether you keep the same auditor.
- Transition. The certification body may already certify against ISO 9001:2026. Or it says when that will be the case.
More points for choosing are in choosing a certification body. At CertificeerWijzer you state all your activities in one request. The request only goes to certification bodies that have all those sectors in their accreditation. The full overview is in certification bodies.
Standards related to ISO 9001
ISO 9001 shares its structure with other management standards. That way you can later combine them in one system and one audit:
Sources
- ISO/TC 176/SC 2, ISO 9001:2026 has been released committee.iso.org
- ISO/TC 176/SC 2, The Process Approach in ISO 9001:2015 (copy at IAQG) ma.iaqg.org
- ISO Survey 2024, infographic globalstd.com
- Ondernemersplein (KVK), ISO and NEN certification for your business ondernemersplein.overheid.nl
- Aanbestedingswet 2012 (Dutch Public Procurement Act), article 2.96 wetten.overheid.nl
- Global ACI-TECH-3-004 (M) version 1.0, Determination of Audit Time (was IAF MD 5:2023) sys.global-aci.org
- Global ACI-TECH-3-002 (M) version 1.0, Transfer of Accredited Certification of Management Systems (was IAF MD 2:2023) sys.global-aci.org
- IAF ID 1:2023, QMS and EMS Scopes of Accreditation (Issue 3, Version 2), now Global ACI-TECH-3-021 iaf.nu
- IAS, summary of ISO/IEC 17021-1:2015 section 9 iasonline.org
- RvA, ASR103 accreditation of certification bodies for management systems (version 1.0, 15 September 2025) rva.nl
- RvA, all accredited bodies for ISO/IEC 17021-1 rva.nl
- Global ACI, Communication to Regulators (version 1, April 2026) nata.com.au