A certification body does not decide for itself how many audit days you pay for, because an international rules document prescribes per standard how those days are calculated. Why do quotes still differ, then, and what do you really pay in the end? After reading this article you will know what the price consists of, how the three years count, what each standard costs at the same company size, which rules document belongs to your standard, what locations, combinations and reductions do and how to check a quote.
Make-up of the price of an ISO certificate
The price of an ISO certificate consists of three parts. You see two of them on the quote:
- Audit days. The largest part of the quote is the number of audit days times the day rate. That rate is usually between €1,000 and €1,800 excluding VAT per day. In the calculation rules for ISO 9001, 14001 and 45001 an audit day normally lasts 8 hours. Travel time does not count as audit time.
- Separate items. On top of that come costs such as the application, the certificate and travel expenses. One certification body charges these separately. Another includes them in a total price. So always compare the total.
- Own time. The hours that you and your people spend building and maintaining the system are not on any quote. They are usually the largest item. How much that is and when a consultant pays off is explained in implementation guidance.
The three-year cycle of an ISO certificate
An ISO certificate is valid for three years. In that time you pay for an initial audit and two surveillance audits. Before the expiry date you also pay for the recertification. That opens the next three years. ISO/IEC 17021-1 is the standard for every certification body for management systems. That standard prescribes the order:
1. Initial audit
The initial audit consists of stage 1 and stage 2 together. This is the starting point of the calculation. All other audits are a share of it.
2. Surveillance audits
In the first and second year after the certificate the certification body returns for a surveillance audit. For ISO 9001, 14001 and 45001 that is together about one third of the initial audit per year. A surveillance audit there is almost never shorter than one day.
3. Recertification
In the third year the recertification follows, before the expiry date. For ISO 9001, 14001 and 45001 it is about two thirds of a new initial audit. The calculation is based on how large your company is at that moment. If you have grown, the recertification grows with you.
Take an ISO 9001 company with 10 FTE and average risk. That comes down to 2 days for the initial audit and two surveillance audits of 1 day each. That is 4 days in the first three years: €4,000 to €7,200 excluding VAT. For the other standards the ratio is in their own rules document.
Costs per standard at 16 to 25 FTE
Ask for four standards and you get a different answer four times, because the number of audit days differs per standard. Here the standards are side by side, for a company of the same size. The table adds up the initial audit and the two surveillance audits. The day rate is usually between €1,000 and €1,800 excluding VAT. For ISO 14001 and ISO 45001 the number of days also depends on your sector. That is why the range is wider there.
| Standard | Initial audit | First three years | Recertification | More about the costs |
|---|---|---|---|---|
| ISO 9001 | 3 days | 5 days, €5,000 to €9,000 | 2 days | Costs of ISO 9001 |
| ISO 14001 | 3 to 5.5 days | 5 to 9.5 days, €5,000 to €17,100 | 2 to 3.5 days | Costs of ISO 14001 |
| ISO 45001 | 3.5 to 5.5 days | 5.5 to 9.5 days, €5,500 to €17,100 | 2.5 to 3.5 days | Costs of ISO 45001 |
| NEN 7510 (supplier, 20 FTE) | 5.4 to 9.6 days | 9 to 16 days, €9,000 to €28,800 | 3.6 to 6.4 days | Costs of NEN 7510 |
| ISO 27001 (20 FTE) | 4.9 to 9.1 days, €4,900 to €16,400 | no public calculation rule | no public calculation rule | Costs of ISO 27001 |
| ISO 42001 | no public calculation rule | no public calculation rule | no public calculation rule | Costs of ISO 42001 |
The days for ISO 9001, 14001 and 45001 come from the tables of Global ACI-TECH-3-004. A surveillance audit is about one third of the initial audit, and almost never shorter than one day. The recertification is about two thirds. The days are rounded to half days, as TECH-3-004 prescribes. The days for NEN 7510 come from the calculation example in the NCS 7510 scheme. For ISO 27001 it is the same example, without the surcharge for healthcare. The recertification is shown separately, because it already belongs to the next three years.
Costs per standard at 6 to 10 FTE
A smaller company needs fewer audit days. For ISO 27001, NEN 7510 and ISO 42001 there is no public calculation example for this size. That is why they are not in this table.
| Standard | Initial audit | First three years | Recertification |
|---|---|---|---|
| ISO 9001 | 2 days | 4 days, €4,000 to €7,200 | 1.5 days |
| ISO 14001 | 3 to 3.5 days | 5 to 5.5 days, €5,000 to €9,900 | 2 to 2.5 days |
| ISO 45001 | 3 to 3.5 days | 5 to 5.5 days, €5,000 to €9,900 | 2 to 2.5 days |
Rules document for the audit days per standard
Your standard determines which document sets the audit days. Every accredited certification body must follow the document for the standard. The certification body's accreditation body can inspect that calculation. In the Netherlands that is the Dutch accreditation body.
| Standard | Rules document | What is special about this standard |
|---|---|---|
| ISO 9001 | Global ACI-TECH-3-004 version 1.0 (was IAF MD 5), table QMS 1 | The number of FTE gives the starting point, at 10 FTE that is 2 days, and your risk class determines whether you end up above or below it (costs of ISO 9001). |
| ISO 14001 | Global ACI-TECH-3-004 version 1.0, table EMS 1 | The table has a column per complexity of your environmental aspects, so that 10 FTE comes to 3 to 3.5 days; at 16 to 25 FTE an office needs 3 days and a demolition company 5.5 days (costs of ISO 14001). |
| ISO 45001 | Global ACI-TECH-3-004 version 1.0, table OH&SMS 1 | Subcontractors working under your direction count as FTE, and at 10 FTE the occupational health and safety risks of your sector give 3 to 3.5 days (costs of ISO 45001). |
| ISO 27001 | ISO/IEC 27006-1:2024, annex C | Its own calculation method in a paid standard, with its own rules for locations (costs of ISO 27001). |
| NEN 7510 | NCS 7510:2025, on top of ISO/IEC 27006-1:2024 | The Dutch certification scheme adds requirements for healthcare to the ISO 27001 method, with a surcharge of 8% for healthcare institutions and 4% for suppliers, and at least half a day (costs of NEN 7510). |
| ISO 42001 | ISO/IEC 42006:2025, first edition of July 2025 | The requirements for certification bodies of AI management systems are new and can only be viewed for a fee (costs of ISO 42001). |
The Global ACI documents have been in force since 28 August 2026. They have the same content as the IAF documents they replace. What else counts per standard, such as risk classes and sector codes, is on the costs page of that standard.
Several locations in the audit days
Do your locations run on one system and do very similar work? Then the auditor visits a sample. So you do not pay for a full audit for every location. For ISO 9001, 14001 and 45001 the calculation rule is in Global ACI-TECH-3-001 (was IAF MD 1):
- Initial audit. The sample is the square root of the number of locations, rounded up: with 9 locations the auditor visits 3.
- Surveillance audit. Every year 0.6 times the square root, so with 9 locations that is 2.
- Recertification. The full square root again, or 0.8 times the square root if your system worked well throughout the cycle.
- Head office. Central management is covered at every audit. That happens at least once per calendar year.
Per location visited, the audit time may be reduced by at most half compared with a separate audit. For ISO 27001 and NEN 7510 the location rules from ISO/IEC 27006-1 apply. TECH-3-001 itself says that those rules then take precedence.
Combining several standards in one ISO audit
Do you have two or more standards assessed in one audit? Then that can save up to 20% of audit days. The calculation rule is in Global ACI-TECH-3-008 (was IAF MD 11). That rule also applies if ISO 27001 is included. The certification body first calculates each standard separately. From that the certification body may deduct at most 20%. How much it will be depends on two things. The first is how far your systems have been merged, such as one set of documents, one internal audit and one management review. The second is how many auditors qualified for several standards the certification body has.
Take a company with 10 FTE and average complexity that combines ISO 9001 and ISO 14001. That company starts at 2 plus 3 days. It can take at most 1 day off that. Anyone who places each standard with a different certification body misses that reduction. They can, however, choose per standard the party that knows their own sector best. When which choice fits is explained in combination of standards.
Limit of 30% reduction for ISO 9001, 14001 and 45001
For ISO 9001, 14001 and 45001 all reductions together may never come out more than 30% below the table. This is set out in Global ACI-TECH-3-004. That document also names the reasons why a certification body deviates from the table:
- Less time. A system that has been running well for some time can save time. A certification body that already knows your system, another certificate you already hold or a small site for the number of people can also save time. A high degree of automation does too, except for ISO 45001.
- More time. Work across several buildings makes the audit longer. The same applies to people who speak different languages. Heavy legislation, such as for food and medicines, also counts. Furthermore, many unique processes or temporary work sites make the audit longer.
There is no upper limit for extra time. The reduction for another certificate lapses if the audit is combined according to TECH-3-008. That reduction is then already included in the combination reduction. For ISO 27001 and NEN 7510 the reasons for more or less time are in annex C of ISO/IEC 27006-1.
Calculation of the audit days in your ISO quote
For ISO 9001, 14001 and 45001 the certification body must give you the calculation of the audit days with its justification. That is part of the contract. See §4.4 of Global ACI-TECH-3-004. For every other standard the certification body must, under ISO/IEC 17021-1, record how much time has been charged and why. So you can ask for that too. With that calculation you compare quotes on four points:
- Days per audit. The number of days for the initial audit, each surveillance audit and the recertification.
- Justification. With how many FTE, which risk or complexity class and which reductions or surcharges the certification body calculates.
- Day rate and separate items. What a day costs and what comes on top separately.
- Total over three years. A low price for the initial audit says little if the surveillance audits are expensive.
Do two certification bodies arrive at a different number of days with the same details? Then the difference lies in that justification. You are entitled to ask about it. Do you already have a certificate and does your certification body's calculation no longer suit you? Then you can also transfer. You do not have to start over.
At CertificeerWijzer one request with the same details goes to several certification bodies. They may cover your standard. That way you see their days, justification and total price side by side.
Sources
- Global ACI-TECH-3-004 (M) version 1.0, Determination of Audit Time of Quality, Environmental, and Occupational Health & Safety Management Systems (was IAF MD 5:2023) sys.global-aci.org
- Global ACI-TECH-3-001 (M) version 1.0, Audit and Certification of a Management System Operated by a Multi-Site Organisation (was IAF MD 1:2023) sys.global-aci.org
- Global ACI-TECH-3-008 (M) version 1.0, Application of ISO/IEC 17021-1 for Audits of Integrated Management Systems (was IAF MD 11:2023) sys.global-aci.org
- Global ACI, IAF and ILAC Document Cross-Reference Table v14.0 sys.global-aci.org
- ISO/IEC 27006-1:2024, edition 1, March 2024 (product page and table of contents) iso.org
- NCS 7510:2025, certification scheme NEN 7510 (NEN product page) nen.nl
- ISO/IEC 42006:2025, edition 1, July 2025 (product page) iso.org
- IAS, summary of ISO/IEC 17021-1:2015 section 9 iasonline.org
- Cresco, De kosten van een ISO 9001-certificaat (example of two day rates: €1,100 and €1,600 per audit day) cresco-consultancy.nl