Skip to content
The number one comparison site for certification in the Netherlands

Transferring an ISO 27701 certificate to another certification body

You can transfer your ISO 27701 certificate to a certification body that has your version of the standard in its accreditation. A certificate on the 2019 version belongs with an ISO 27001 certificate. So you transfer those two together. On 24 September 2026 CertificeerWijzer counted 8 certification bodies in the Netherlands with ISO 27701 in their accreditation. Of these, 2 were allowed to certify the 2025 version. The new certification body does not carry out a separate transfer audit and your three-year period continues. If you transfer to a certification body that may certify the 2025 version, you can include the transition straight away.

On this page
  1. Rules for an ISO 27701 transfer
  2. Certification bodies that may take over your ISO 27701 certificate
  3. Taking ISO 27001 along in an ISO 27701 transfer
  4. Documents for an ISO 27701 transfer
  5. Combining transfer and transition for ISO 27701
  6. Combining ISO 27701 with other standards when transferring
  7. ISO 27701 transfer around the recertification
  8. Comparing ISO 27701 certification bodies for your transfer

Looking for the step to the new version of the standard? That is covered in the transition to ISO 27701:2025. Do you not have an ISO 27701 certificate yet? Then start with the steps to ISO 27701.

For ISO 27701 far fewer certification bodies may take over your certificate than for ISO 27001. Where can you go, and what do you take with you when you change? After reading this article you will know which rules apply, who may take over your certificate per version, which documents to prepare, how to combine transfer and transition, how much choice you have left with other standards added and when it is best to transfer.

Rules for an ISO 27701 transfer

With an ISO 27701 transfer you do not start over, and your expiry date stays the same. The same rules apply as for any other transfer. The rulebook is Global ACI-TECH-3-002 (IAF MD 2), for those who want to read it themselves.

The new certification body first checks your certificate, your audit reports and your open nonconformities. This is called the pre-transfer review. It decides on your certificate before your next audit. Your first audit with the new certification body is the surveillance audit or recertification that was already scheduled anyway.

The steps are in transferring to another certification body. That article also covers the cases in which you start over after all.

ISO/IEC 27706 is the rules document for certification bodies of ISO 27701:2025. In the list of all clauses of that standard we found no clause on transferring. We have not read the full text. So ask the new certification body whether it requires anything extra for ISO 27701.

Certification bodies that may take over your ISO 27701 certificate

TECH-3-002 requires that your certificate falls within the accreditation of your new certification body. For ISO 27701 that depends on your version. The accreditation does not run per sector code (IAF code), so your sector plays no role.

On 24 September 2026 CertificeerWijzer counted 8 certification bodies in the Netherlands with ISO 27701 in their accreditation. Of these, 5 are accredited through the Dutch accreditation body. The other 3 are accredited only through the British UKAS. On 17 October 2026 we checked their accreditations again, and the split per version was the same then. Per version it looked like this:

Reference date 24 September 2026May take over
Certificate on ISO 27701:2019, together with ISO 27001 all 8
Certificate on ISO 27701:2025 2, both through the Dutch accreditation body

A certificate on the 2019 version can therefore go to any of the 8. Transferring with such a certificate is possible until the accreditation for the 2019 version expires. The Dutch accreditation body gives 15 October 2028 for this. A certificate on the 2025 version can only go to a certification body that is accredited under ISO/IEC 27706. On the reference date there were 2. The British UKAS wants all certification bodies it accredits to be on the new version by 31 October 2027 at the latest.

Taking ISO 27001 along in an ISO 27701 transfer

For the 2019 version, ISO 27701 is an extension of ISO 27001. The Dutch accreditation body describes that accreditation as "ISO/IEC 27001 & ISO/IEC 27701". So you transfer both certificates at the same time. All 8 certification bodies also have ISO 27001 in their accreditation, so that does not limit your choice. For ISO 27001 itself the same rules apply when transferring. They are in transferring an ISO 27001 certificate.

For the 2025 version, ISO 27701 is a standalone certificate. You can then transfer only ISO 27701 and leave ISO 27001 where it is. One certification body for both is usually more convenient. Then both standards can be covered in one audit.

Documents for an ISO 27701 transfer

With an ISO 27701 transfer the new certification body wants to see your certificate and your latest audit reports. It also wants to know which nonconformities are still open. In addition, prepare these documents that belong to this standard:

  • Scope with your roles. Which processing activities fall under your system, and whether you are the controller, the processor or both. Your roles determine which tables of controls are assessed.
  • Choice of controls. The overview of which controls from Annex A you apply and why you do not need others. For the 2019 version this is in your Statement of Applicability for ISO 27001.

The new certification body builds the audit programme on those documents. If you want to add a role or a processing activity at the transfer, state that in your request. That changes the audit time. Which other documents ISO 27701 requires is explained in the documents for ISO 27701.

Combining transfer and transition for ISO 27701

If you have a certificate on the 2019 version, you have to move to the 2025 version anyway. That can be done in one process. You transfer to a certification body that may already certify the 2025 version. The transition is then combined with your first audit at that certification body. Agree on this in advance in the quote. Also ask how much extra time the certification body charges for the transition. If you do the transition first with your current certification body and only transfer after that, the new certification body receives your documents on the new version. That is also possible. What the transition requires is explained in the transition to ISO 27701:2025.

Combining ISO 27701 with other standards when transferring

Do you want more standards with the same certification body? Then fewer remain. On 24 September 2026 CertificeerWijzer counted how many of the 8 also had these standards in their accreditation:

ISO 27701 plusCertification bodiesOf which with the 2025 version
ISO 27001 8 2
NEN 7510 5 2
ISO 42001 3 1
ISO 9001 8 2

For ISO 9001 your sector code also counts, because that standard is accredited per sector. So check whether the certification body may certify ISO 9001 for your sector. How to bring standards together in one audit is explained in combining standards.

ISO 27701 transfer around the recertification

At the recertification you start a new three-year period, with a new quote. That is a logical moment to compare. For ISO 27701 the transition comes on top. If your recertification falls before October 2028, you can do the transfer, transition and recertification in one audit. Request quotes as soon as your surveillance audit in year 2 is behind you. The new certification body must decide on your certificate before the recertification starts.

Comparing ISO 27701 certification bodies for your transfer

Compare certification bodies on the version they may certify, and on your other standards. Also compare them on the number of audit days, the day rate and the total up to and including your next recertification. You do not pay for a separate transfer audit. Do ask whether the new certification body charges anything for the pre-transfer review. At CertificeerWijzer one transfer request goes to certification bodies that may certify your standards and your version. That way you put their quotes for the rest of your period side by side.

Sources

  1. Global ACI-TECH-3-002 (M) version 1.0, Transfer of Accredited Certification of Management Systems (was IAF MD 2:2023) sys.global-aci.org
  2. ISO/IEC 27706:2025, table of contents (preview via EN ISO/IEC 27706:2025, STN) normy.normoff.gov.sk
  3. RvA, scope C548 (valid from 29 April 2026) rva.nl
  4. RvA, scope C024 (valid from 14 October 2026) rva.nl
  5. RvA, all accredited organisations for ISO/IEC 17021-1 rva.nl
  6. UKAS, schedule of accreditation 0003 (Management Systems, issue 193, 15 September 2026) ukas.com
  7. UKAS, F659 Transition Requirements and Gap Analysis, ISO/IEC 27701:2025 and ISO/IEC 27706:2025 ukas.com

Frequently asked questions

Can I simply change certification body?

Yes. You can transfer a valid, accredited certificate to another accredited certification body at any time. This is set out in Global ACI-TECH-3-002 (formerly IAF MD 2). Read more about the rules

What happens to my current certificate?

You receive a certificate of your own from the new certification body, for the same standard. Your three-year period and your expiry date continue. Your old certification body may not suspend your certificate because you leave.

What does the new certification body need?

The new certification body reviews your documents in a pre-transfer review: is your certificate within both accreditations, is it valid, why are you transferring, were your audits done on time and are you dealing with a regulator. If a major nonconformity is still open, a visit beforehand follows. That visit is not an audit. Read how transferring works

How long does the transfer process take?

There is no fixed period for this. The new certification body first reviews your documents and then makes a decision, before any audit takes place. Only cancel your old contract once the new certificate is there, so you are never without a valid certificate. Read how transferring works

Are there costs involved in transferring?

Our comparison is free. The transfer itself can involve costs. Whether the pre-transfer review costs money differs per certification body, as do one-off costs for registration or the new certificate. If your contract with your old certification body is still running, it may charge you for the rest of the term. So compare the price of all audits up to and including your next recertification. Read what transferring costs

What if I have just had an audit?

Then you can simply transfer. Your three-year period and your expiry date continue. If a major nonconformity is still open after that audit, the new certification body first visits you beforehand. That visit is not an audit.

My current auditor knows our company well. Isn't that a waste?

That can be a reason to stay. If you transfer, the new certification body does not start from scratch: it receives your certificate, your audit reports, your open nonconformities and your complaints. Auditors do differ in how well they know your type of company. So ask in every quote which auditor you will get. Read why companies transfer

How much time and effort does transferring take?

Most of the work is done by the new certification body. You give your old certification body permission to pass on your data and have your certificate, your latest audit reports, your open nonconformities and your complaints ready. After that, the audits that were already planned simply continue. Read the full step-by-step plan

Is a cheaper certification body also less good?

Not necessarily. Every accredited certification body works to the same standard for certification bodies, ISO/IEC 17021-1, and is supervised by an accreditation body. Prices differ because of the day rate, separate items and the number of audit days the certification body calculates. Certification bodies do differ in how well their auditors know your type of company and how soon they have an audit date. Read how to compare certification bodies

What happens to open nonconformities when you transfer?

They move with you to the new certification body. A major nonconformity must be resolved and checked by the new certification body before the new certificate is issued. For a minor one it is enough that the new certification body accepts your plan to resolve it.

When is transferring not possible?

With a suspended or expired certificate, a certificate without accreditation, an audit not done on time or missing audit reports. You then start with an initial audit at the new certification body.

Is your question not listed?

Get in touch