A certification body already wants to know in your application which hazardous substances you work with and which occupational health and safety laws apply to you. Which documents must you have ready, and which are really mandatory for ISO 45001? After reading this article you will know which documents are mandatory, what you supply with the application, how your RI&E (risk inventory and evaluation) fits in, which documents and records the standard asks for and how the auditor looks at your documents in stage 1 and stage 2.
What is mandatory for ISO 45001: law and standard
Under the Arbowet (Dutch Working Conditions Act) you as an employer must already have an RI&E with plan of action, even without ISO 45001. For the certificate the standard also asks for fixed documents. They come in two kinds. Documents you keep up to date, such as your occupational health and safety policy. Records you keep as evidence of what has happened, such as the report of an accident investigation. Both are listed in a table below.
The standard calls everything you record together documented information. You choose the form yourself: paper, a shared folder or an app. How much you record depends on your company. A construction company with scaffolding, cranes and hazardous substances records more than a consultancy firm with ten people.
The version that applies now is ISO 45001:2018, with the climate amendment from 2024. In the Netherlands the standard is called NEN-EN-ISO 45001:2023, with A1:2024. What the clauses ask is explained in the requirements of ISO 45001.
Details in your application for ISO 45001
For ISO 45001 recording already starts before the audit. The rule document for occupational health and safety certification, Global ACI-TECH-3-016 (IAF MD 22), requires that your application contains these details:
- your main hazards and occupational health and safety risks;
- the hazardous substances you use in your work;
- the occupational health and safety laws and other rules that apply to you;
- how many people work at your own location and how many elsewhere, such as on construction sites or at customers' premises.
In the number of people, also count the people from subcontractors who work under your control or influence. Global ACI-TECH-3-004 (IAF MD 5) requires this for ISO 45001. With these details the certification body chooses your risk category and your number of audit days. How that works out is explained in the costs of ISO 45001.
RI&E and plan of action as the basis for ISO 45001
Your RI&E is the most important document for ISO 45001. In the Netherlands it is already mandatory under article 5 of the Arbowet. In it you record in writing which risks the work involves for your employees. You describe the hazards and the measures that limit the risks. A plan of action belongs with it. It states which measures you take and within what period.
For ISO 45001 the RI&E is a good starting point, but usually not enough. The Arbowet already covers your own employees and agency workers. Article 5 also requires that you update the RI&E when your work changes. ISO 45001 also takes in subcontractors and visitors. And the standard asks that you measure whether your measures work.
Documents you keep up to date for ISO 45001
ISO 45001 asks for these documents for the certificate. You keep them up to date:
| Document | What it contains |
|---|---|
| Scope | which work and which locations fall under your system, including construction sites and work at customers' premises |
| Occupational health and safety policy | what your company stands for in the field of occupational health and safety |
| Occupational health and safety objectives | what you want to achieve and how you measure it |
| Legal and other requirements | which occupational health and safety laws, rules and customer requirements apply to you |
| Hazards and risks | your RI&E, with the way you find hazards and assess risks |
| Emergencies | how you prepare for fire, an accident or a leak, and how you respond then |
Records you keep for ISO 45001
In addition to those documents you keep evidence that you do what you have agreed. ISO 45001 asks for these records for the certificate:
| Subject | What you keep |
|---|---|
| Competence | evidence that your people can do their work safely, such as diplomas, training and instructions |
| Measurements | the outcome of your measurements, such as accidents, sickness absence and inspections on the shop floor |
| Legal compliance | your own check of whether you comply with the occupational health and safety laws, with the outcome |
| Internal audit | the audit programme and the outcomes |
| Management review | the outcome of the fixed moment at which management checks whether the system works |
| Incidents | what happened, the cause, what you did and whether the measure worked |
The auditor also wants to see two things, although it is not settled that the standard requires a record for them:
- Participation. Minutes of consultation with your workers on occupational health and safety. In the Netherlands that consultation with the works council or staff representation is already mandatory under article 12 of the Arbowet. If you have neither, you consult your employees themselves.
- Subcontractors. How you select, assess and monitor them on safety. The auditor must assess that approach.
Evidence of legal compliance for ISO 45001
The evidence that you comply with the occupational health and safety laws is the document that matters most for ISO 45001. TECH-3-016 has its own annex for it. The certification body only issues a certificate once you have shown with your own check that you meet the law. Do you not yet meet a requirement somewhere? Then you need a plan with an end date, preferably agreed with the regulator. In the audit report the auditor writes down how well your system covers your legal obligations.
A certificate is not proof that you comply with every law. An auditor is not an inspector and does not issue a statement about your compliance. The auditor does assess whether your own check is correct.
Documents in stage 1 of the ISO 45001 audit
In stage 1 the auditor checks whether your documents are complete enough to really assess your system. The rules for this are in ISO/IEC 17021-1, the standard every accredited certification body follows. For ISO 45001 the auditor mainly looks at:
- your scope, your locations and your construction sites or projects;
- your RI&E and how you find hazards and assess risks;
- your overview of occupational health and safety laws and the status of your own compliance check;
- whether your internal audit and management review are planned and under way.
You receive the conclusions of stage 1 in writing. They contain the points that may become a nonconformity in stage 2. A nonconformity is something that does not meet the standard. Use the time until stage 2 to resolve those points.
Documents in stage 2 of the ISO 45001 audit
In stage 2 the auditor compares your documents with the shop floor. TECH-3-016 warns certification bodies not to spend too much audit time on office work. The auditor assesses your compliance against what you actually do, and not against your plans. That is why the auditor walks along on the shop floor or the construction site. There the auditor checks whether the measures from your RI&E are applied. The auditor also asks employees, your works council and subcontractors about their knowledge of the risks.
Do you break the same rule deliberately or again and again? Then you do not get a certificate. If evidence that you comply with the law is missing, you in principle do not get a certificate either. Only with a plan with an end date can the certification body still issue a certificate in exceptional cases. A missing mandatory document can be a major nonconformity (major). You must resolve it before you get the certificate. How the rest of the process goes is explained in the steps for ISO 45001.
Comparing ISO 45001 certification bodies on the audit of your documents
The requirements for your documents are the same for every certification body. How a certification body approaches stage 1 does differ. One asks for your RI&E and your overview of laws in advance. Another comes to visit straight away. In the quote, ask how stage 1 works, how many construction sites or locations the auditor visits in stage 2 and what it costs if stage 2 has to be redone. Put the quotes side by side on these points. Through CertificeerWijzer you request them in one go from certification bodies that may cover your sector.
Sources
- Global ACI-TECH-3-016 (M) version 1.0, Application of ISO/IEC 17021-1 for the Certification of OH&SMS (was IAF MD 22:2023) sys.global-aci.org
- Global ACI-TECH-3-004 (M) version 1.0, Determination of Audit Time (was IAF MD 5:2023) sys.global-aci.org
- Arbeidsomstandighedenwet (Dutch Working Conditions Act), articles 5 and 12 (in force from 1 July 2026) wetten.overheid.nl
- ISO, ISO 45001:2018 (status and amendment) iso.org
- NEN, NEN-EN-ISO 45001:2023 nl with A1:2024 nen.nl