Every employer in the Netherlands must already have a risk inventory and evaluation (RI&E). What does ISO 45001 ask on top of that? After reading this article you will know how the requirements are structured, what each clause asks of you, how your RI&E and the Arbowet (Dutch Working Conditions Act) fit in, which version applies and how the requirements affect your choice of certification body.
Structure of the ISO 45001 requirements
The requirements for your company are in clauses 4 to 10 of ISO 45001. They say what you must arrange. How you do that is up to you. Clauses 1 to 3 describe what the standard is about and which terms it uses. ISO 9001 and ISO 14001 have the same seven clauses with requirements. That is why you can combine them in one system.
ISO 45001 works with the cycle of plan, do, check and act (PDCA). ISO itself names these key points of ISO 45001: the involvement of management, the participation of workers, finding hazards, assessing risks, complying with the law, preparing for emergencies and investigating incidents. You will find them in the clauses below.
Clause 4 of ISO 45001: context of your organisation
Clause 4 asks that you know the environment you work in. You determine which matters inside and outside your company affect your occupational health and safety policy. Since the 2024 amendment you also determine whether climate change plays a role in this. Think of outdoor work in the heat. You determine who has an interest in your occupational health and safety policy and what they ask of you. Your own workers are the first group here. Then you record what falls under the system. That is called the scope. Do you work on construction sites or at customers' premises? Then that work belongs to it if you control it or have influence over it.
Clause 5 of ISO 45001: leadership and worker participation
Clause 5 places the responsibility for occupational health and safety with top management. Management draws up an occupational health and safety policy, assigns the tasks and makes sure the system works. In addition, ISO 45001 asks that your workers have their say and take part. They contribute their views on hazards, measures and improvements. In the Netherlands you must already consult the works council or staff representation on your occupational health and safety policy. That is set out in article 12 of the Arbowet. In addition, the auditor must talk to the representative of your workers in person. The rule document for occupational health and safety certification, Global ACI-TECH-3-016 (IAF MD 22), requires this.
Clause 6 of ISO 45001: planning
Clause 6 is the heart of the standard. You find the hazards in your work and assess the risks. You also look at opportunities to make the work healthier and safer. You establish which laws and other commitments apply to you, such as the Arbowet, the Arbobesluit (Working Conditions Decree) and requirements of clients. Then you plan actions and set objectives that you can measure.
This is where your RI&E fits. It is a legal requirement and already describes the hazards, the measures and a plan of action with deadlines. That is set out in article 5 of the Arbowet. ISO 45001 does not replace that duty. So use your RI&E as the basis for this clause. Then you do the work once.
Clause 7 of ISO 45001: support
Clause 7 is about what you need to work safely. That is people, resources and knowledge. You make sure people are competent for their work, including the risks that come with it. You also make sure they know what the policy means for them and what they must do in case of danger. You arrange communication inside and outside your company, also with subcontractors and visitors. And you control the documents you record. Which ones those are is explained in the mandatory documents for ISO 45001.
Clause 8 of ISO 45001: operation
Clause 8 asks that you eliminate hazards and reduce risks. The standard gives a fixed order for this. First you try to eliminate the hazard. If that does not work, you replace it with something less hazardous. Then come technical measures, such as a guard rail or extraction. Then follow arrangements and instructions. Personal protective equipment comes last. That order ties in with article 3 of the Arbowet: first tackle it at the source, and collective protection takes precedence over individual protection. You also control changes in your work, your purchasing and the work of contractors and agency workers. And you are prepared for emergencies, such as fire or an accident.
Here an auditor walks along on the shop floor or the construction site. The auditor checks whether the measures from your RI&E are really applied there. Why the auditor has to visit for this is explained in the steps to ISO 45001.
Clause 9 of ISO 45001: performance evaluation
Clause 9 asks that you check yourself whether the system works. You measure what matters, such as accidents, sickness absence and the implementation of your plan of action. You also check whether you comply with the laws you found in clause 6. You hold an internal audit and a management review. The latter is a fixed moment at which management checks whether the system does what it should do.
That check on the law weighs heavily for ISO 45001. The certification body only issues a certificate once you have shown with your own check that you comply with the occupational health and safety laws. That is set out in the annex on compliance of TECH-3-016.
Clause 10 of ISO 45001: improvement
Clause 10 asks that you tackle incidents and mistakes at the cause. An incident also includes a near miss. Does something happen? Then you resolve it immediately. You find out why it happened. You take a measure that prevents recurrence. Then you check whether that measure worked. You also keep improving your occupational health and safety performance.
Does a technician almost fall off the same ladder twice? Then the auditor wants to see both reports. In addition, the auditor wants to see the cause. And evidence that it does not happen again afterwards.
Current version of ISO 45001
The version that applies now is ISO 45001:2018. In 2024 one amendment on climate change was added (ISO 45001:2018/Amd 1:2024). It adds to clause 4 that you determine whether climate change plays a role for you. ISO and IAF wrote with the amendment that it does not change the intent of the requirements. So there was no transition period, and a new certificate is not needed. In the Netherlands you buy the standard from NEN as NEN-EN-ISO 45001:2023, with the amendment A1:2024.
ISO is working on a new version. The draft (ISO/DIS 45001) went to ballot in June 2026. ISO plans the new version as ISO 45001:2027. What will change then and how long you have to transition will only be settled once that version is published. Until then you certify against the 2018 version.
Excluding an ISO 45001 requirement
No, within your scope you may not leave out any requirement for ISO 45001. What you do choose is that scope itself. You may not leave out of it any work that affects your occupational health and safety performance. TECH-3-016 says that your system must cover all activities that you control or influence and that can affect your occupational health and safety performance. A construction site where you are in charge always falls under it. That also applies if the work takes place at a customer's premises.
Outsourced work does not drop out of your system. Do you have part of the work done by subcontractors? Then according to Global ACI-TECH-3-004 (IAF MD 5) the auditor assesses how you select, monitor and direct them. The auditor also talks with their people who work for you. Their own system is not audited.
ISO 45001 requirements and the choice of your certification body
Your scope determines what is on your certificate. It also determines which certification body may certify you. For ISO 45001 a certification body is approved per sector. That goes through the sector codes (IAF codes) in its accreditation. The scope also determines which risk category you fall into, and therefore how many audit days you pay for. That is explained in the costs of ISO 45001.
In your request for quotes, state what falls under your system. Also mention the work on construction sites, at customers' premises and by subcontractors. Then every certification body calculates with the same details. Through CertificeerWijzer those details go in one go to certification bodies that may cover your sector.
Sources
- ISO, ISO 45001:2018 (description, status, amendment, successor, FAQ) iso.org
- NEN, NEN-EN-ISO 45001:2023 nl with A1:2024 nen.nl
- IAF and ISO, joint communiqué on the climate amendment (22 February 2024) iaf.nu
- ISO/TC 283, news about the revision of ISO 45001 committee.iso.org
- Arbeidsomstandighedenwet (Dutch Working Conditions Act), articles 3, 5, 12 and 13 (in force from 1 July 2026) wetten.overheid.nl
- Global ACI-TECH-3-016 (M) version 1.0 (was IAF MD 22:2023) sys.global-aci.org
- Global ACI-TECH-3-004 (M) version 1.0 (was IAF MD 5:2023) sys.global-aci.org