Skip to content
The number one comparison site for certification in the Netherlands

Transferring an ISO 42001 certificate to another certification body

You can transfer your ISO 42001 certificate to another certification body with ISO 42001 in its accreditation. On 24 September 2026 CertificeerWijzer counted 4 certification bodies in the Netherlands with such an accreditation: BSI through the Dutch accreditation body and the British UKAS, DNV and TÜV NORD through the Dutch accreditation body, and LRQA only through UKAS. Sector codes play no role. The new certification body does check whether your scope, with your AI systems and your role, falls within its own accreditation. There is no separate transfer audit. Your three-year period continues.

Compare certification bodies for ISO 42001
On this page
  1. Rules for an ISO 42001 transfer
  2. Certification bodies that may take over your ISO 42001 certificate
  3. Documents for an ISO 42001 transfer
  4. Audit days and costs of an ISO 42001 transfer
  5. Combining ISO 42001 with ISO 27001, ISO 27701 or ISO 9001
  6. Transferring for ISO 42001 around the recertification
  7. Comparing ISO 42001 certification bodies before your transfer

For ISO 42001 you can choose from only four accredited certification bodies in the Netherlands. Can you still transfer certification body without starting over, and what should you watch out for? After reading this article you will know which rules apply, who may take over your certificate, which documents you get ready, what the audits cost, how much choice you keep with ISO 27001 or ISO 9001 as well and when it is best to transfer.

Rules for an ISO 42001 transfer

An ISO 42001 transfer follows the same rules as every other transfer. Those rules are in Global ACI-TECH-3-002. Global ACI is the worldwide collaboration of accreditation bodies, and this document used to be called IAF MD 2. Under those rules the new certification body first checks your documents. The decision is made before your next audit. And your expiry date stays the same. The steps are explained in transferring to another certification body. That is also where you find the cases in which you start over after all, such as a suspended certificate. If a nonconformity is still open, you can still transfer. With a major nonconformity the new certification body only issues its own certificate after checking that you have resolved it. With a minor nonconformity the certification body wants to see your plan.

A separate transferring audit (a "transfer audit") does not exist in those rules. The pre-transfer review is a check of documents. Under TECH-3-002 a visit beforehand is not an audit either. ISO/IEC 42006:2025 is the rule document for certification bodies of ISO 42001. The table of contents of that standard has no separate clause on transferring. So TECH-3-002 applies without any addition. Your first audit at the new certification body is the surveillance audit or recertification that was already scheduled anyway.

Certification bodies that may take over your ISO 42001 certificate

For ISO 42001 every certification body with ISO 42001 in its accreditation is a candidate. Accreditation here does not run per sector, as it does for ISO 9001. TECH-3-002 requires your certificate to fall within the accreditation of both your old and your new certification body. On 24 September 2026 CertificeerWijzer counted 4 certification bodies in the Netherlands with ISO 42001 in their accreditation in the Dutch accreditation register and the UKAS schedules:

Reference date 24 September 2026Accreditation for ISO 42001 throughWhat the accreditation lists
BSI Dutch accreditation body and UKAS highly complex systems and systems of limited complexity (Dutch accreditation body); roles developer, provider, user and producer (UKAS)
DNV Dutch accreditation body ISO 42001
TÜV NORD Dutch accreditation body ISO 42001
LRQA UKAS roles developer, provider and user

The roles mean: you build AI (developer), you supply AI to others (provider) or you deploy AI (user). If an accreditation lists roles, that counts in a transfer. If you develop AI yourself, that role must fall within the accreditation of your new certification body. Ask about this before you accept a quote. In the transfer the new certification body also checks the accreditation body of your old certification body. That body must have ISO 42001 under the worldwide agreement between accreditation bodies, the MLA. ISO 42001 is a young standard. So ask your new certification body whether it can recognise your certificate without reservation.

Documents for an ISO 42001 transfer

In an ISO 42001 transfer the new certification body wants to see your certificate and your audit reports. Above all it wants to know exactly what your system covers. So get three documents ready that belong to this standard:

  • Scope. Which AI systems, which role and which locations fall under your system. The scope is on your certificate. It determines whether the transfer is possible.
  • Choice of controls. Which controls from annex A you apply and why you exclude others (Statement of Applicability).
  • Impact assessments. The latest outcomes per AI system, with what has changed since the previous audit.

The new certification body builds the audit programme for the remaining years on those documents. Have you added an AI system or taken on a new role since your last audit, for example because you now offer a model yourself? Then report that in your request. That changes your scope and the audit time. Which other documents an AI system requires is explained in the documents for ISO 42001.

Audit days and costs of an ISO 42001 transfer

With an ISO 42001 transfer you mainly pay for the audits that were already scheduled anyway. The new certification body calculates them itself with annex A of ISO/IEC 42006:2025. That annex is only available for a fee. The result depends on how the certification body assesses the complexity of your AI. That is why the number of days can differ per quote. So ask every certification body how many days it charges and which kind of complexity your system falls into. Count on a day rate of €1,000 to €1,800 excluding VAT per audit day. How the audit time comes about is explained in the costs of ISO 42001. What the pre-transfer review costs is explained in transferring.

Combining ISO 42001 with ISO 27001, ISO 27701 or ISO 9001

Do you also want to bring other certificates to the same certification body when you transfer? With ISO 42001 you lose little choice by doing so. The four certification bodies also have most of the related standards. On 24 September 2026 CertificeerWijzer counted this many certification bodies with ISO 42001 and:

CombinationCertification bodies
ISO 42001 without another standard 4
ISO 27001 4
ISO 9001 4
NEN 7510 4
ISO 27701 3

For two of the four, accreditation for ISO 27001 runs through UKAS. For ISO 9001 your sector code also counts, because that standard is accredited per sector. So check whether the certification body may cover ISO 9001 for your sector. Whether one certification body for everything suits you better than two is explained in combination of standards. That is also where you find what a combined audit saves.

Transferring for ISO 42001 around the recertification

At the recertification you begin a new three-year period, with a new quote. So that is a logical moment to compare ISO 42001 quotes. Request them as soon as your surveillance audit in year 2 is behind you. The new certification body must decide on your certificate before the recertification begins. Another logical moment is a major change in your AI, such as your own model that you are going to offer. Then you are looking at your scope again anyway.

Comparing ISO 42001 certification bodies before your transfer

Compare certification bodies that have ISO 42001, your role and your other standards in their accreditation. Compare them on the number of audit days and the complexity classification. Also compare them on the day rate, the separate items and the total up to and including your next recertification. At CertificeerWijzer one transferring request goes to certification bodies with ISO 42001 in their accreditation. That way you put their quotes for the rest of your period side by side.

Sources

  1. Global ACI-TECH-3-002 (M) version 1.0, Transfer of Accredited Certification of Management Systems (was IAF MD 2:2023) sys.global-aci.org
  2. ISO/IEC 42006:2025, preview with table of contents (via SIST) cdn.standards.iteh.ai
  3. RvA, scope of C122 (BSI Group The Netherlands B.V.) rva.nl
  4. RvA, all accredited bodies (ISO/IEC 17021-1), scopes in the matcher database rva.nl
  5. UKAS, schedules of BSI (0003) and LRQA (0001), Management Systems ukas.com

Frequently asked questions

Can I simply change certification body?

Yes. You can transfer a valid, accredited certificate to another accredited certification body at any time. This is set out in Global ACI-TECH-3-002 (formerly IAF MD 2). Read more about the rules

What happens to my current certificate?

You receive a certificate of your own from the new certification body, for the same standard. Your three-year period and your expiry date continue. Your old certification body may not suspend your certificate because you leave.

What does the new certification body need?

The new certification body reviews your documents in a pre-transfer review: is your certificate within both accreditations, is it valid, why are you transferring, were your audits done on time and are you dealing with a regulator. If a major nonconformity is still open, a visit beforehand follows. That visit is not an audit. Read how transferring works

How long does the transfer process take?

There is no fixed period for this. The new certification body first reviews your documents and then makes a decision, before any audit takes place. Only cancel your old contract once the new certificate is there, so you are never without a valid certificate. Read how transferring works

Are there costs involved in transferring?

Our comparison is free. The transfer itself can involve costs. Whether the pre-transfer review costs money differs per certification body, as do one-off costs for registration or the new certificate. If your contract with your old certification body is still running, it may charge you for the rest of the term. So compare the price of all audits up to and including your next recertification. Read what transferring costs

What if I have just had an audit?

Then you can simply transfer. Your three-year period and your expiry date continue. If a major nonconformity is still open after that audit, the new certification body first visits you beforehand. That visit is not an audit.

My current auditor knows our company well. Isn't that a waste?

That can be a reason to stay. If you transfer, the new certification body does not start from scratch: it receives your certificate, your audit reports, your open nonconformities and your complaints. Auditors do differ in how well they know your type of company. So ask in every quote which auditor you will get. Read why companies transfer

How much time and effort does transferring take?

Most of the work is done by the new certification body. You give your old certification body permission to pass on your data and have your certificate, your latest audit reports, your open nonconformities and your complaints ready. After that, the audits that were already planned simply continue. Read the full step-by-step plan

Is a cheaper certification body also less good?

Not necessarily. Every accredited certification body works to the same standard for certification bodies, ISO/IEC 17021-1, and is supervised by an accreditation body. Prices differ because of the day rate, separate items and the number of audit days the certification body calculates. Certification bodies do differ in how well their auditors know your type of company and how soon they have an audit date. Read how to compare certification bodies

What happens to open nonconformities when you transfer?

They move with you to the new certification body. A major nonconformity must be resolved and checked by the new certification body before the new certificate is issued. For a minor one it is enough that the new certification body accepts your plan to resolve it.

When is transferring not possible?

With a suspended or expired certificate, a certificate without accreditation, an audit not done on time or missing audit reports. You then start with an initial audit at the new certification body.

Is your question not listed?

Get in touch