A VCA* audit at a small company takes three quarters of a day at the office. What do you pay in total, and why does one quote still differ from another? After reading this article you will know what a VCA certificate costs per level, how the audit days are calculated, why your work sites weigh so heavily and how to compare quotes.
Price of a VCA certificate per level
A certification body charges the number of audit days times its own day rate. An audit day usually costs €1,000 to €1,800 excluding VAT. A VCA certificate is valid for three years. You pay for the first audit and then a surveillance audit every year.
The number of days follows from a fixed calculation rule from SSVV. How it works is explained under the audit days below. This is what that looks like in three examples:
| Company | First audit | Two surveillance audits together | First three years |
|---|---|---|---|
| Installer, 12 FTE, VCA*, 4 work sites at the same time | 1.25 to 1.75 days | 1.5 to 2.5 days | 2.75 to 4.25 days, €2,750 to €7,650 |
| Contractor, 30 FTE, VCA**, 8 work sites at the same time | 2.5 to 3.25 days | 2.5 to 4 days | 5 to 7.25 days, €5,000 to €13,050 |
| Maintenance company, 120 FTE, VCA Petrochemie, 25 work sites at the same time | 3.25 to 4.5 days | 3.75 to 6.25 days | 7 to 10.75 days, €7,000 to €19,350 |
The range in each row comes from the work sites. The certification body decides per visit whether a quarter or half a day is needed. After three years the recertification follows. It costs at most as much as the first audit. The certification body then only carries out stage 1 if that is necessary. Travel and certificate costs and your own hours are separate from these days. How such items appear in a quote is the same for every standard. You can find it in costs of certification.
Audit days for VCA in annex D
VCA has its own calculation table for the audit time. It is in annex D of the scheme. A certification body uses that table for VCA, and not the international table for ISO standards. The table gives a minimum. The certification body then applies the factors from the international rules. For VCA those factors may only increase the time. This is the time at your head office for the first audit, stage 1 and stage 2 together:
| FTE | VCA* | VCA** | VCA Petrochemie |
|---|---|---|---|
| fewer than 50 | 0.75 day | 1.75 days | 1.75 days |
| 50 up to and including 100 | 1 day | 2 days | 2 days |
| more than 100 | 1 day | 2 days | 2 days |
So above 50 FTE the time at the office hardly increases. A company with 500 FTE has as much office time for VCA** as a company with 60 FTE. A fixed part of that time is for stage 1. At 0.75 and 1 day that is 0.25 day. At 1.75 and 2 days that is 0.75 day. The two surveillance audits together get the same office time as stage 2 of your first audit. For VCA* with fewer than 50 FTE that is 0.5 day together.
The time for the report is not included in these days. So it may be listed separately in a quote. How many hours that is differs per certification body. So ask about it and include it in your comparison.
For comparison: a construction company with 10 FTE needs 3.5 days for the first audit of ISO 45001. For VCA* that same company starts at 0.75 day, plus the work sites. The difference between the two is explained in what VCA is.
Work sites in the VCA audit time
For VCA the auditor visits your work sites at every audit. That applies to the first audit, every surveillance audit and the recertification. Each visit costs a quarter to half a day. How many visits there are depends on the average number of work sites where you work at the same time:
| Work sites at the same time | Visits per audit |
|---|---|
| 1 | 1 |
| 2 to 5 | 2 |
| 6 to 10 | 3 |
| 11 to 20 | 4 |
| 21 to 30 | 5 |
| 31 to 50 | 6 |
| 51 to 100 | 7 to 8 |
| more than 100 | 9 to 11 |
For a contractor with many jobs this is often the largest item. Take the installer from the example. It works at four sites at the same time, so the auditor visits a work site twice per audit. At the office the first audit takes 0.75 day. The two work site visits together take 0.5 to 1 day.
Does one employee always do short and similar work? Then the number of visits may be halved, rounded up. If the certification body sees extra risks, it may also plan more visits. The certification body must justify that choice in a recorded risk assessment.
Branch offices for VCA
Do you have several offices with the same work and one system? Then you get one certificate. The auditor then always visits your head office. Of the branch offices the auditor visits a part. Each visit to a branch office costs 0.25 day. At the first audit it is the square root of the number of branch offices, rounded up. With 5 or 6 branch offices that is 3. At a surveillance audit it is 0.6 times the square root. With 5 or 6 branch offices that is 2. At the recertification it is in principle as many as at the first audit. Was your system demonstrably effective throughout the previous period? Then it may be fewer.
Who counts as FTE for VCA
For VCA everyone who has an influence on your VCA system counts. If you certify one department, people such as a central safety service and the responsible management also count. Temporary workers count too, such as agency workers, seconded staff, interns and self-employed people working under your authority. You count your permanent people on the day of your application. You count temporary workers as an average over the twelve months before. Are you just around 50 FTE? Then that makes a difference of a quarter of a day at the office at every level.
Fee to SSVV and other costs
SSVV charges the certification body a fixed amount per certificate for the management of the scheme. The certification body passes that on to you one to one. On its site SSVV states the amounts that have applied since 1 January 2022: €90 for VCA*, €155 for VCA** and €155 for VCA Petrochemie, excluding VAT. For VCA-MAX SSVV states €75.
SSVV still lists the old version 2017/6.0 with those amounts. Whether they are the same for version 2026/6.1, SSVV does not say. So ask the certification body which amount is passed on.
In addition, you have the costs of keeping your system running. Think of diplomas, equipment inspections and protective equipment. Those costs depend on your company and are not in the quote of the certification body.
Comparing VCA quotes
The calculation table is the same for every certification body. Still, quotes can differ. That comes down to four things:
- Time per work site. A quarter or half a day per visit.
- Extra visits. If the certification body sees extra risks, more work sites may be added. Ask for the reason, because the certification body has to record it.
- Report. The time for the report falls outside the table.
- Day rate. The price per audit day.
Ask each certification body how many work sites the auditor visits and for how long. Also ask what the total over three years costs, including the fee to SSVV. If the sums do not add up, or if your certification body no longer suits your company, you can transfer without starting over.
At CertificeerWijzer you request quotes with one request from certification bodies that may cover VCA for your sector. You enter your level, your FTE and your number of work sites once. That way every certification body calculates with the same figures, and you see where the difference lies.
Sources
- SSVV, VCA checklist version 2026/6.1 (annex D, minimum number of man-days) ssvv.nl
- SSVV, Company certification (costs and fee rates) ssvv.nl
- Global ACI-TECH-3-004 (M) version 1.0, Determination of Audit Time (was IAF MD 5:2023), table OH&SMS 1 sys.global-aci.org
- RvA, SAP-C007 version 4, accreditation protocol for VCA and VCU rva.nl