Skip to content
The number one comparison site for certification in the Netherlands

Transferring a VCA certificate to a new certification body

You can transfer your VCA certificate to another certification body without starting over. The VCA scheme prescribes that the international rules for transferring apply. Those are now in Global ACI-TECH-3-002, formerly IAF MD 2. Your current three-year cycle continues. The new certification body must have a contract with SSVV and an accreditation for VCA from the Dutch accreditation body in your sector code. On 24 September 2026 CertificeerWijzer counted 20 VCA certification bodies, 19 of which for construction. If you have VCA-MAX, the Behaviour Module moves with it to the same certification body.

On this page
  1. Transferring for VCA in brief
  2. Which certification bodies may take over your VCA certificate
  3. Audit days and costs of a VCA transfer
  4. Your VCA history on the new certificate
  5. VCA-MAX and a transfer
  6. Transferring VCA and ISO together
  7. Transferring VCA around the recertification
  8. Comparing VCA certification bodies for your transfer

In the Netherlands twenty certification bodies may certify VCA. Can you simply take your VCA certificate to one of the others, and what changes then? After reading this article you will know who may take over your certificate, what a transfer costs, what happens to your history and VCA-MAX and which moment suits best.

Transferring for VCA in brief

A VCA transfer follows the international rules for transferring. The VCA scheme itself prescribes that those rules apply. They are now in Global ACI-TECH-3-002, the international rule document for transferring that used to be called IAF MD 2. A new first audit is not needed. Your certificate keeps its expiry date, and the new certification body continues in your current three-year cycle.

If you still have an open nonconformity, the new certification body looks at it during the pre-transfer review. A major nonconformity must be resolved before the new certification body issues your certificate. For a minor nonconformity the new certification body must approve your plan. The steps, the pre-transfer review and the cases in which you still start over are explained in transferring to another certification body. What is different for VCA is explained below.

Which certification bodies may take over your VCA certificate

For VCA the new certification body must meet two requirements. It has a contract with SSVV, the owner of the scheme. And it has an accreditation for VCA from the Dutch accreditation body. That accreditation applies per sector code (IAF code). According to TECH-3-002, the old and the new certification body must both have your work in their accreditation. So a certification body without your code is ruled out.

On 24 September 2026 CertificeerWijzer counted 20 certification bodies with VCA in their accreditation in the Dutch accreditation register. Those are the same 20 that SSVV names as recognised certification bodies. This is how many may certify VCA in these sectors:

SectorSector codeCertification bodies
Construction, including civil engineering 28 19 of the 20
Machinery and equipment 18 19 of the 20
Transport, storage and communication 31 19 of the 20
Business services 35 18 of the 20
Metal industry 17 17 of the 20
Engineering services 34 17 of the 20
Electrical and optical equipment 19 15 of the 20
Chemical industry 12 5 of the 20

Your sector code follows from the NACE codes on your certificate. Those are the European codes for types of business. The first four digits of your SBI code (the Dutch business activity code) at the Chamber of Commerce (KvK) are almost always the same as your NACE code. The NACE codes of your certificate are also listed in SSVV's Centraal Certificaten Register, the central certificate register. If you work in several sectors, the new certification body must have all of them.

Audit days and costs of a VCA transfer

The audits after a transfer follow the same calculation table as at your old certification body. That table is in annex D of the scheme. The number of visits to work sites also follows from that table. If the certification body sees extra risks, it may plan additional visits.

What can also differ is the time per visit. That is a quarter to half a day. The day rate and the time for the report also differ per certification body.

Take an installer with 12 FTE and VCA*. That company works at four sites at the same time. The two surveillance audits together get 0.5 day at the office. At each surveillance audit two work site visits are added, of 0.25 to 0.5 day per visit. If a quote charges much more, ask how many work sites the certification body visits and why. Extra risks at your work sites can be a good reason. The calculation per level is explained in the costs of VCA. For the costs of the pre-transfer review the same rules apply for VCA as for any other standard. They are explained in transferring.

Your VCA history on the new certificate

Your new certification body issues its own certificate. It states since when that certification body has certified you. The scheme allows your earlier VCA certification to be added, if you can demonstrate it. Ask your new certification body to put that on it. Then clients see that you have had VCA for longer. The new certification body puts your certificate in the Centraal Certificaten Register within a month. Clients who look you up then see the new details straight away.

VCA-MAX and a transfer

If you have VCA-MAX, you have the Behaviour Module alongside VCA. You obtain that module from the certification body of your ordinary VCA certificate. The certificate for the module expires on the same day as your VCA certificate. So if you transfer, VCA and the module move together to the new certification body. Ask therefore whether it also covers VCA-MAX. Do you work in construction for clients that ask for safety culture at level 3? Then VCA-MAX counts as evidence for companies with up to 250 employees, except for work for ProRail.

Transferring VCA and ISO together

Do you also have ISO 9001 or ISO 45001 alongside VCA? When you transfer, you can move them together with VCA to one certification body. That certification body must then have your sector code in its accreditation for VCA and for each ISO standard. For ISO 45001 there are fewer of those than for VCA. On the same day CertificeerWijzer counted 12 certification bodies for ISO 45001, including those with a foreign accreditation. What a combined audit delivers is explained in combination of standards.

Transferring VCA around the recertification

Around the recertification the certification body counts your FTE and your work sites again. That is a logical moment to transfer. At your branch offices the certification body then in principle visits as many as at the first audit. So start comparing straight after your second surveillance audit. Give the new certification body time for the pre-transfer review and the decision. Then the planning of the recertification follows. It must be completed before the expiry date of your certificate.

Comparing VCA certification bodies for your transfer

Compare certification bodies that have your sector codes. Pay attention to the number of work sites they visit, the time per visit, the day rate and the time for the report. Ask whether they may also cover VCA-MAX and your other standards. At CertificeerWijzer you request quotes with one request from VCA certification bodies that have your sector codes in their accreditation. That way you only compare parties that may take over your certificate.

Sources

  1. SSVV, VCA checklist version 2026/6.1 (procedure chapters 1, 6, 10 and 12, annex D) ssvv.nl
  2. Global ACI-TECH-3-002 (M) version 1.0, Transfer of Accredited Certification of Management Systems (was IAF MD 2:2023) sys.global-aci.org
  3. SSVV, Recognised certification bodies ssvv.nl
  4. SSVV, VCA-MAX safety culture combination ssvv.nl
  5. RvA, SAP-C007 version 4, accreditation protocol for VCA and VCU rva.nl
  6. RvA, all accredited bodies for ISO/IEC 17021-1 rva.nl
  7. CBS, Standaard Bedrijfsindeling (SBI, Dutch standard industrial classification) cbs.nl

Frequently asked questions

Can I simply change certification body?

Yes. You can transfer a valid, accredited certificate to another accredited certification body at any time. This is set out in Global ACI-TECH-3-002 (formerly IAF MD 2). Read more about the rules

What happens to my current certificate?

You receive a certificate of your own from the new certification body, for the same standard. Your three-year period and your expiry date continue. Your old certification body may not suspend your certificate because you leave.

What does the new certification body need?

The new certification body reviews your documents in a pre-transfer review: is your certificate within both accreditations, is it valid, why are you transferring, were your audits done on time and are you dealing with a regulator. If a major nonconformity is still open, a visit beforehand follows. That visit is not an audit. Read how transferring works

How long does the transfer process take?

There is no fixed period for this. The new certification body first reviews your documents and then makes a decision, before any audit takes place. Only cancel your old contract once the new certificate is there, so you are never without a valid certificate. Read how transferring works

Are there costs involved in transferring?

Our comparison is free. The transfer itself can involve costs. Whether the pre-transfer review costs money differs per certification body, as do one-off costs for registration or the new certificate. If your contract with your old certification body is still running, it may charge you for the rest of the term. So compare the price of all audits up to and including your next recertification. Read what transferring costs

What if I have just had an audit?

Then you can simply transfer. Your three-year period and your expiry date continue. If a major nonconformity is still open after that audit, the new certification body first visits you beforehand. That visit is not an audit.

My current auditor knows our company well. Isn't that a waste?

That can be a reason to stay. If you transfer, the new certification body does not start from scratch: it receives your certificate, your audit reports, your open nonconformities and your complaints. Auditors do differ in how well they know your type of company. So ask in every quote which auditor you will get. Read why companies transfer

How much time and effort does transferring take?

Most of the work is done by the new certification body. You give your old certification body permission to pass on your data and have your certificate, your latest audit reports, your open nonconformities and your complaints ready. After that, the audits that were already planned simply continue. Read the full step-by-step plan

Is a cheaper certification body also less good?

Not necessarily. Every accredited certification body works to the same standard for certification bodies, ISO/IEC 17021-1, and is supervised by an accreditation body. Prices differ because of the day rate, separate items and the number of audit days the certification body calculates. Certification bodies do differ in how well their auditors know your type of company and how soon they have an audit date. Read how to compare certification bodies

What happens to open nonconformities when you transfer?

They move with you to the new certification body. A major nonconformity must be resolved and checked by the new certification body before the new certificate is issued. For a minor one it is enough that the new certification body accepts your plan to resolve it.

When is transferring not possible?

With a suspended or expired certificate, a certificate without accreditation, an audit not done on time or missing audit reports. You then start with an initial audit at the new certification body.

Is your question not listed?

Get in touch