Skip to content
The number one comparison site for certification in the Netherlands

Transferring an ISO 45001 certificate to a new certification body

You can transfer an ISO 45001 certificate to another accredited certification body at any time. Your three-year period continues. The new certification body must have your sector code in its accreditation. On 24 September 2026 CertificeerWijzer counted 12 certification bodies for ISO 45001 in the Netherlands: all 12 for construction, 6 for healthcare. In the pre-transfer review the new certification body also looks at your ongoing contacts with the inspectorate about compliance with the law.

Compare certification bodies for ISO 45001
On this page
  1. Transferring for ISO 45001 in brief
  2. Sector codes: which certification bodies may cover your ISO 45001 sector
  3. Pre-transfer review for an ISO 45001 transfer
  4. Audit days and costs of an ISO 45001 transfer
  5. ISO 45001 transfer and the new version of the standard
  6. Combining ISO 45001 with other standards when transferring
  7. ISO 45001 transfer around the recertification
  8. Comparing ISO 45001 certification bodies before your transfer

Of the 12 certification bodies that may cover ISO 45001 in the Netherlands, only 6 may cover healthcare. Can you take your ISO 45001 certificate to another certification body, and which one may take it over? After reading this article you will know which certification bodies may cover your sector, what the new certification body additionally looks at for ISO 45001, what a transfer costs in audit days and which moment suits best.

Transferring for ISO 45001 in brief

Yes, you can transfer your ISO 45001 certificate at any time to an accredited certification body that has your sector code. Your three-year period continues and you do not have to start over. The rules are the same for every standard and are in the rule document for transferring, Global ACI-TECH-3-002 (IAF MD 2). The steps, the pre-transfer review and the cases in which you still start over are explained in transferring to another certification body. What is different for ISO 45001 is explained below.

Sector codes: which certification bodies may cover your ISO 45001 sector

For ISO 45001 too, the accreditation of a certification body applies per sector. Each sector has a sector code (IAF code), from 1 to 39. The rule document for occupational health and safety certification, Global ACI-TECH-3-016 (IAF MD 22), takes those codes from Global ACI-TECH-3-021 (IAF ID 1). For each code it lists the hazards that often play a role in that sector. TECH-3-002 requires your certificate to fall within the accreditation of both your old and your new certification body. So if a certification body does not have your code, it cannot take over your certificate.

On 24 September 2026 CertificeerWijzer counted 12 certification bodies with a location in the Netherlands and an accreditation for ISO 45001. Of these, 8 are accredited through the Dutch accreditation body. Four are accredited only through UKAS, the British sister organisation of the Dutch accreditation body. Two may cover all 39 sectors. Four may cover at most 8. This is how many certification bodies may cover ISO 45001 in these sectors:

SectorSector codeCertification bodies
Construction 28 12
Business services 35 11
Machinery and equipment 18 11
Waste, water and other services 39 11
Metal 17 9
Trade and repair 29 9
Engineering services 34 9
Chemicals 12 7
Transport 31 7
IT 33 7
Food 3 6
Healthcare 38 6

A few certification bodies have a further restriction within a code, such as only part of business services. Your code is on your current certificate or in your audit report. Do you also have ISO 9001 with the same certification body? Then the list for that standard may be different. So check per standard. Which certification bodies they are is shown at certification bodies.

Pre-transfer review for an ISO 45001 transfer

With every transfer the new certification body first carries out a pre-transfer review. It looks at your certificate, your latest audit reports, open nonconformities and complaints. TECH-3-002 also mentions your ongoing contacts with regulators about compliance with the law. For ISO 45001 that is mainly the Netherlands Labour Authority (Nederlandse Arbeidsinspectie). Do you have an ongoing investigation or a fine after an accident? Then mention it yourself in your application. The new certification body will ask about it anyway.

For ISO 45001 a serious accident can already have consequences before your transfer. You must report such an accident or a serious violation to your certification body immediately. TECH-3-016 requires this. The certification body can then carry out an extra audit and suspend your certificate if your system fell seriously short. A suspended certificate cannot be transferred. Then you start over at the new certification body. When else that applies is explained in when transferring is not possible.

Audit days and costs of an ISO 45001 transfer

With an ISO 45001 transfer you mainly pay for the audits that were already scheduled anyway. The new certification body calculates them itself with table OH&SMS 1 from Global ACI-TECH-3-004 (IAF MD 5). What the pre-transfer review costs and when the certification body visits first is explained in transferring.

Still, the number of days can differ. For ISO 45001 the new certification body chooses your risk category itself: high, medium or low. The certification body also decides itself how many people from subcontractors count. Take a construction company with 25 FTE in the high category. The surveillance audit takes 2 days. That is €2,000 to €3,600 excluding VAT. The recertification takes 3.5 days. That is €3,500 to €6,300. If a certification body classifies the same company as medium, the surveillance audit is 1.5 days. If there is a difference, ask which category and which count the certification body uses. How the days add up is explained in the costs of ISO 45001.

ISO 45001 transfer and the new version of the standard

ISO is working on a new version of ISO 45001. The draft went to a vote in June 2026. ISO plans the new version as ISO 45001:2027. There is no transition period yet. How and when you transition will only be settled once the rules are there.

You will need an audit for the transition anyway. That is a logical moment to check whether your certification body still suits you. Then also ask whether your new certification body may already certify against the new version.

Combining ISO 45001 with other standards when transferring

Do you have ISO 9001, ISO 14001 or VCA besides ISO 45001? Then you can bring them under one certification body when you transfer. That is only possible with a certification body that may cover your sector for each standard. A combined audit can save time, because the auditor looks at your system in one go. What that saves and when you are better off keeping them separate is explained in combining standards. How ISO 45001 and VCA relate to each other is explained in what VCA is.

ISO 45001 transfer around the recertification

At the recertification the certification body recalculates your audit days anyway. It bases this on your current number of people, your subcontractors and your work. That is why it is a logical moment to transfer. Request quotes as soon as your surveillance audit in year 2 is behind you. The new certification body must decide on your certificate before the recertification starts.

Comparing ISO 45001 certification bodies before your transfer

Compare certification bodies that have your sector code. Look at the number of audit days, the risk category, how they count subcontractors, how many construction sites or locations they visit and the day rate. Also ask what experience the auditor has in your sector. Calculate the total up to and including your next recertification. Through CertificeerWijzer your request only goes to certification bodies that may take over your certificate for your sector.

Sources

  1. Global ACI-TECH-3-002 (M) version 1.0, Transfer of Accredited Certification of Management Systems (was IAF MD 2:2023) sys.global-aci.org
  2. Global ACI-TECH-3-016 (M) version 1.0, Application of ISO/IEC 17021-1 for the Certification of OH&SMS (was IAF MD 22:2023), annex B sys.global-aci.org
  3. IAF ID 1:2023, QMS and EMS Scopes of Accreditation, now Global ACI-TECH-3-021 iaf.nu
  4. Global ACI-TECH-3-004 (M) version 1.0, Determination of Audit Time (was IAF MD 5:2023) sys.global-aci.org
  5. ISO, ISO 45001:2018 (status and successor) iso.org
  6. RvA, all accredited bodies for ISO/IEC 17021-1 rva.nl

Frequently asked questions

Can I simply change certification body?

Yes. You can transfer a valid, accredited certificate to another accredited certification body at any time. This is set out in Global ACI-TECH-3-002 (formerly IAF MD 2). Read more about the rules

What happens to my current certificate?

You receive a certificate of your own from the new certification body, for the same standard. Your three-year period and your expiry date continue. Your old certification body may not suspend your certificate because you leave.

What does the new certification body need?

The new certification body reviews your documents in a pre-transfer review: is your certificate within both accreditations, is it valid, why are you transferring, were your audits done on time and are you dealing with a regulator. If a major nonconformity is still open, a visit beforehand follows. That visit is not an audit. Read how transferring works

How long does the transfer process take?

There is no fixed period for this. The new certification body first reviews your documents and then makes a decision, before any audit takes place. Only cancel your old contract once the new certificate is there, so you are never without a valid certificate. Read how transferring works

Are there costs involved in transferring?

Our comparison is free. The transfer itself can involve costs. Whether the pre-transfer review costs money differs per certification body, as do one-off costs for registration or the new certificate. If your contract with your old certification body is still running, it may charge you for the rest of the term. So compare the price of all audits up to and including your next recertification. Read what transferring costs

What if I have just had an audit?

Then you can simply transfer. Your three-year period and your expiry date continue. If a major nonconformity is still open after that audit, the new certification body first visits you beforehand. That visit is not an audit.

My current auditor knows our company well. Isn't that a waste?

That can be a reason to stay. If you transfer, the new certification body does not start from scratch: it receives your certificate, your audit reports, your open nonconformities and your complaints. Auditors do differ in how well they know your type of company. So ask in every quote which auditor you will get. Read why companies transfer

How much time and effort does transferring take?

Most of the work is done by the new certification body. You give your old certification body permission to pass on your data and have your certificate, your latest audit reports, your open nonconformities and your complaints ready. After that, the audits that were already planned simply continue. Read the full step-by-step plan

Is a cheaper certification body also less good?

Not necessarily. Every accredited certification body works to the same standard for certification bodies, ISO/IEC 17021-1, and is supervised by an accreditation body. Prices differ because of the day rate, separate items and the number of audit days the certification body calculates. Certification bodies do differ in how well their auditors know your type of company and how soon they have an audit date. Read how to compare certification bodies

What happens to open nonconformities when you transfer?

They move with you to the new certification body. A major nonconformity must be resolved and checked by the new certification body before the new certificate is issued. For a minor one it is enough that the new certification body accepts your plan to resolve it.

When is transferring not possible?

With a suspended or expired certificate, a certificate without accreditation, an audit not done on time or missing audit reports. You then start with an initial audit at the new certification body.

Is your question not listed?

Get in touch