Skip to content
The number one comparison site for certification in the Netherlands

ISO certificate for a tender or public procurement

A government body may require an ISO certificate in a tender if that fits the risks of the contract. This follows from the Aanbestedingswet 2012 (Dutch Public Procurement Act) and the Gids Proportionaliteit (Proportionality Guide). In a European tender it must also accept an equivalent certificate from another EU country. If, through no fault of your own, you cannot obtain the certificate in time, it must also accept other evidence. You then have to show that your measures are equivalent. A first ISO certificate takes about eight months from scratch. If you have a deadline, start ten months in advance.

On this page
  1. Rules for a certificate requirement in a tender
  2. Certificate requirement that is too heavy in a tender
  3. Equivalent certificates and other evidence in a tender
  4. Getting an ISO certificate for a tender deadline
  5. Your ISO certificate ready for every tender
  6. Comparing certification bodies with a tender deadline

In a European open tender, the Aanbestedingswet (Dutch Public Procurement Act) generally gives you at least 45 days to submit a bid, and you will not obtain a first ISO certificate in that time. May a contracting authority simply require that certificate, and what do you do if you do not have it in time? After reading this article you will know which rules apply to a certificate requirement, when such a requirement is too heavy, which other evidence must count, what you do when facing a deadline and how you keep your certificate ready for the next tender.

Rules for a certificate requirement in a tender

A government body may require an ISO certificate, as long as that requirement is proportionate to the contract. This is laid down in article 1.10 of the Aanbestedingswet 2012. For smaller, national tenders the same rule is in article 1.13. The act applies to government bodies and other contracting authorities. An ordinary business customer is not covered by it and is free to decide which requirements it sets.

Asking for a certificate is a requirement placed on you as a company. Such a requirement is called a suitability requirement: with it you must show that you can handle the contract. The Gids Proportionaliteit (Proportionality Guide) works out the rule. The Aanbestedingsbesluit (Dutch Public Procurement Decree) makes that guide mandatory for European, national and multiple private tenders. If a contracting authority departs from it, it must explain this in the tender documents.

The certification body that issued your certificate must also meet requirements. In a European tender the contracting authority refers to certificates from certification bodies that meet the European standards for certification. What that means in practice is explained in accreditation.

Certificate requirement that is too heavy in a tender

A certificate requirement is too heavy if it has nothing to do with the risks of the contract. That follows from provision 3.5 B of the Gids Proportionaliteit. The contracting authority only sets requirements that relate to real risks of the contract, or to what you need to carry out the contract properly. The guide does not mention ISO certificates separately. A requirement for ISO 27001 is therefore easy to defend for a contract involving sensitive data. For a contract without sensitive data that requirement is harder to justify.

In a multiple private tender, the government body itself invites a few companies. Under provision 3.5 C it may only set suitability requirements there if it does not yet know whether a company is suitable. A certificate requirement should therefore be an exception there.

If you think a requirement is too heavy, you take three steps:

1. Nota van inlichtingen

The nota van inlichtingen (memorandum of information) is the round in which bidders ask questions about the tender. The contracting authority answers them in one document. Ask why the certificate is needed for this contract. Also ask whether other evidence counts, or whether the certificate may also be provided at the start of the contract. The answer applies to every bidder.

2. Complaint to the contracting authority

If the nota van inlichtingen does not help, you submit a complaint to the contracting authority itself. Give the contracting authority a reasonable period to respond.

3. Complaint to the Commissie van Aanbestedingsexperts

If the contracting authority sticks to the requirement, you can go to the Commissie van Aanbestedingsexperts (Dutch Commission of Procurement Experts). It handles complaints about the set-up of a tender, such as the requirements. It only does so if you first submitted the complaint to the contracting authority.

Equivalent certificates and other evidence in a tender

In a European tender, a contracting authority must accept more than just the certificate named in the documents. This is laid down in article 2.96 for quality and in article 2.97 for the environment, such as ISO 14001. There are two rules:

  • Equivalent certificate. The contracting authority accepts equivalent certificates from bodies in other EU countries.
  • Other evidence. Can you not obtain the certificate within the deadline for a reason that cannot be attributed to you? Then the contracting authority also accepts other evidence of equivalent measures. You must then show that your measures meet the standard.

The act does not say when a reason cannot be attributed to you. The contracting authority assesses that. Other evidence can be: your manual, your internal audit, your management review and a signed order with a certification body stating the date of your audit. Article 2.96 is in the part of the act for European tenders. In a national tender the act therefore does not prescribe it, although the contracting authority may allow other evidence. There, however, every requirement must be proportionate to the contract.

Getting an ISO certificate for a tender deadline

A first ISO 9001 certification takes about eight months from scratch. That is much longer than the minimum of 45 days you get to submit a bid in a European open tender. For a tender that is running now, you are therefore usually too late.

Does your certificate have to be in place by a fixed date? Then start ten months in advance, so that you have two months of slack. How that time is made up is explained in certifying for the first time. Do you already work with fixed arrangements, such as work instructions and a complaints log? Then it can be done in four to five months.

If the tender comes before your certificate, you can do the following:

  • Ask. Ask in the nota van inlichtingen whether the certificate may also be provided at the start of the contract. Also ask which other evidence counts.
  • Provide other evidence. In a European tender you can rely on article 2.96 if, through no fault of your own, you could not obtain the certificate in time.
  • Fill in honestly. In the self-declaration you state whether you meet the requirements. Do not state that you have a certificate if you do not have it yet. The contracting authority will in any case request the evidence from the bidder who is going to be awarded the contract.
  • Start now for the next one. If you start on your system now, you will have the certificate for a next tender.

Allow for three to four months of waiting time until your first audit. That differs per certification body. So request quotes straight away, while you are still building your system. A consultant can speed up the build. When that pays off is explained in implementation support.

Your ISO certificate ready for every tender

A certificate only helps if it fits the contract. So before you bid, check three things:

  • Scope. The work and the locations of the contract must be covered by your certificate. That is called the scope. A certificate for your office says nothing about your work on the construction site.
  • Validity. Your certificate must be valid at the moment the contracting authority asks for it. Does it expire during the tender or the contract? Then make sure the recertification is completed in time.
  • Accreditation. The certificate must come from a certification body with a recognised accreditation. A contracting authority can look up your certificate with the certification body or in IAF CertSearch. Not every certificate is listed there.

Plan your recertification well before the expiry date. Can your certification body not make it in time? Then you can transfer without starting over, as long as your certificate is still valid. The new certification body first reviews your file, so do not leave that until the last few weeks.

Comparing certification bodies with a tender deadline

With a deadline, the first audit date counts as well as the price. Certification bodies differ in how quickly they can send an auditor. They also differ in which sectors they may certify. For ISO 9001 not every certification body may certify every sector.

At CertificeerWijzer you request quotes with a single request from certification bodies that may certify your standard for your sector. Put your deadline in the request and ask in every quote for the first possible date for stage 1 and stage 2. Then you can see who can make it in time.

Sources

  1. Aanbestedingswet 2012, articles 1.10, 1.13, 2.71, 2.90, 2.96, 2.97 and 2.102 (in force from 30 April 2026) wetten.overheid.nl
  2. Gids Proportionaliteit, 3rd revision, 1 January 2022, provisions 3.5 B and 3.5 C pianoo.nl
  3. PIANOo, Gids Proportionaliteit (mandatory guideline) pianoo.nl
  4. Commissie van Aanbestedingsexperts, submitting a complaint commissievanaanbestedingsexperts.nl
  5. RvA, ASR103 accreditation of certification bodies for management systems, version 1.0 (IAF CertSearch, §1.2) rva.nl

Frequently asked questions

How long does it take to get certified?

For ISO 9001, a first certificate takes about eight months from scratch. Three to four months of that is waiting time at the certification body. If you request quotes straight away, that waiting time runs alongside your preparation. If you already work with fixed procedures, you can be done in four to five months. For other standards the lead time can differ.

What does certification cost?

You pay the number of audit days times the day rate of the certification body. That rate is usually between €1,000 and €1,800 per day, excluding VAT. How many days it takes follows per standard from a fixed rules document, based among other things on the number of employees. An ISO 9001 company with 10 FTE and average risk needs 4 days in total for the initial audit and two surveillance audits: €4,000 to €7,200 excluding VAT over the first three years. On top of that come separate items and your own time, and a consultancy if you hire one.

Do I need to hire a consultancy?

No, an advisor is not required for any ISO certification. An advisor mainly pays off if nobody in your company knows the standard, you have little time or you need the certificate by a fixed date. The advisor can take over the research and the writing. Running your system and the audit remain your work.

Which standard suits my company?

That depends on what you want to demonstrate. ISO 9001 is about quality, ISO 14001 about the environment, ISO 45001 about health and safety at work and ISO 27001 about information security. In Dutch healthcare you are legally required to work according to NEN 7510, and for AI there is ISO 42001. If a customer or tender asks for a certificate, check which standard it names. View all standards

How do I choose the right certification body?

Only choose a certification body that is accredited for your standard. For ISO 9001, ISO 14001 and ISO 45001 your sector must also be in that accreditation. Then compare the number of audit days and the price over three years, and ask which auditor you will get and when the first audit can take place. CertificeerWijzer only lists accredited certification bodies. Read what to look out for

What does accreditation mean and why does it matter?

Accreditation is the oversight of the certification body. An accreditation body assesses whether a certification body works competently and impartially, always for specific standards. A certificate within that accreditation is recognised by all accreditation bodies in the arrangement of Global Accreditation Cooperation (Global ACI), such as the British UKAS. A certificate without accreditation falls outside that recognition and cannot be transferred. Read how the certification chain works

Is your question not listed?

Get in touch