Starting from scratch, a first ISO 9001 certificate takes you about eight months, and a large part of that is waiting for the certification body. Which steps do you actually take, and how do you get to your certificate as quickly as possible? After reading this article you will know which steps you take, how long the process takes, what differs per standard and how to choose a certification body.
Steps to a first ISO certificate
The process is set out in ISO/IEC 17021-1, the standard with requirements for certification bodies. You build a system. The certification body assesses it in two stages. Someone other than the auditor decides. These are the steps:
1. Standard and scope
You choose the standard that fits what you want to demonstrate: quality, information security, environment or safety. Often a customer or contracting authority asks for it. Many companies also certify to improve their own work. Then you record the scope. That is the work and the locations covered by the certificate, and the number of people who work there. This largely determines how many audit days you pay for. It also determines which certification bodies may certify you.
2. Quotes and certification body
Request quotes as soon as you decide. Then the waiting time of the certification body runs in parallel with your own work. In your request you state your scope, your locations and processes, what you outsource and whether you have had a consultant. The certification body then checks whether it is competent for your standard and work. The certification body also calculates how much time the audit takes. Choose a certification body with accreditation for your standard. The Dutch accreditation body or a sister organisation abroad then checks whether that certification body complies with ISO/IEC 17021-1. An audit day usually costs €1,000 to €1,800 excluding VAT. How the number of days and the price over three years come about is explained under the costs of certification.
3. Building the management system
You describe how you work. You record policy, objectives, risks and responsibilities. For this you use the requirements and mandatory documents of your standard as a checklist. You can do this yourself or with a consultant. When a consultant pays off and which consultant fits alongside which certification body is explained under implementation support.
4. Letting the system run
You work with your own arrangements and record what happens. Think of complaints, the measurement of your objectives and mistakes with what you did about them. Those records are the evidence the auditor looks for in stage 2. No rule sets a fixed period for this. In practice, count on at least three months.
5. Internal audit and management review
You check yourself whether your system works. Or you have an internal auditor do that. In the management review, management discusses what needs to improve. Schedule both before stage 1. Complete them before stage 2. In stage 1 the auditor checks whether they are scheduled and under way. In stage 2 the auditor checks whether they produce results.
6. Certification audit in two stages
In stage 1 the auditor checks whether you are ready. This covers your scope, locations, processes, the laws that apply to you and your planning of the internal audit and management review. In stage 2 the auditor assesses on site whether your system works in practice. Between the stages you get time to resolve what came up in stage 1. That is usually a few weeks. What the auditor does in each stage and what rights you have is explained under the certification audit.
7. Nonconformities and decision
A major nonconformity must be demonstrably resolved before you get the certificate. For a minor nonconformity an approved plan is enough. Are you unable to resolve a major within 6 months of the last day of stage 2? Then a new stage 2 follows. You pay for it again. After that, someone within the certification body decides on your certificate. That person did not carry out the audit.
8. Certificate and the three-year cycle
From the decision, your certificate is valid for three years. The first surveillance audit falls within 12 months of the decision. After that a surveillance audit follows every calendar year. In the third year the recertification follows. It must be completed before your certificate expires. A scheme for a particular sector can prescribe a different cycle. For the common ISO standards it is three years.
Lead time of a first certification
A first ISO 9001 certification takes about eight months from scratch. That applies if you request quotes straight away. For ISO 27001 and NEN 7510 it is at most about eight months. The steps for each standard say what determines the time there. For ISO 9001 the time consists of these parts:
| Part | Lead time |
|---|---|
| Building the system, from scratch | about 3 months |
| Letting the system run, with internal audit and management review | at least 3 months |
| Stage 1 to stage 2 | a few weeks |
| Resolving nonconformities and decision | a few weeks; with a major at most 6 months after stage 2 |
| Waiting time at the certification body | 3 to 4 months, in parallel with your build if you request quotes straight away |
Do you already work with fixed arrangements, such as work instructions and a complaints log? Then you are done in four to five months. Even then your system still has to run for months. Do you only request quotes once your system is finished? Then the waiting time comes on top. Does the certificate have to be in place by a fixed date, such as for a tender? Then start ten months in advance. That way a major or a full schedule does not cost you your deadline. For a small company the audit itself only takes a few days.
Differences per standard in audit days and requirements
The process is the same, but each standard has its own requirements and its own calculation rule for the audit days. For a company of 1 to 5 people, stage 1 and stage 2 together take 1.5 days for ISO 9001. For ISO 14001 and ISO 45001 they take 2.5 to 3 days. That depends on how serious the environmental or safety risks of your work are. That is what Global ACI-TECH-3-004 (IAF MD 5) says. ISO 27001 has its own method in annex C of ISO/IEC 27006-1:2024. Who may certify you also differs. For ISO 9001 a certification body is accredited per sector, with sector codes (IAF codes). So not every certification body may certify every company.
What is different per standard is explained in the steps for that standard:
- ISO 9001, quality: accreditation per sector code; the audit time depends on the number of people and the risk of your sector.
- ISO 14001, environment: the audit time also depends on how significant your environmental aspects are.
- ISO 45001, occupational health and safety: the audit time also depends on the safety risks of your sector.
- ISO 27001, information security: its own calculation rule for the audit time from ISO/IEC 27006-1.
- NEN 7510, information security in healthcare: based on ISO 27001, with its own certification scheme, NCS 7510, managed by NEN.
Want to obtain several standards at the same time? Then that is possible in one combined audit.
Choosing a certification body for your first ISO certificate
The rules are the same at every accredited certification body. The certification bodies themselves are not. They differ in the number of audit days they charge. They also differ in their day rate, their first available date and their knowledge of your sector. So compare the number of days for stage 1 and stage 2 in every quote. Also compare the day rate, the costs of the surveillance audits and the first date for stage 1. What else to look out for is explained under choosing a certification body. Does your certification body no longer suit you later on? Then you can transfer without starting again.
At CertificeerWijzer you request quotes with one request. You request them from certification bodies that may certify your standard for your work. Do that on the day you decide. That way their waiting time runs while you build your system.
Sources
- IAS, summary of ISO/IEC 17021-1:2015 section 9 iasonline.org
- Global ACI-TECH-3-004 (M) version 1.0, Determination of Audit Time of Quality, Environmental, and Occupational Health & Safety Management Systems (was IAF MD 5:2023) sys.global-aci.org
- ISO/IEC 27006-1:2024, table of contents (annex C, audit time) cdn.standards.iteh.ai
- RvA, ASR103 accreditation of certification bodies for management systems, version 1.0 rva.nl
- NEN, information security in healthcare (NEN 7510 and NCS 7510) nen.nl