Skip to content
The number one comparison site for certification in the Netherlands

ISO 9001 certificate for construction companies

For ISO 9001, construction companies fall under sector code (IAF code) 28. That applies to SBI 41, 42 and 43, including installation and finishing. On 24 September 2026 CertificeerWijzer counted 19 certification bodies in the Netherlands that may certify ISO 9001 for construction. At medium risk, a construction company with 25 FTE needs 3 audit days for the initial audit. That costs €3,000 to €5,400. You pay less if you do not design. For complex construction you pay more. The auditor also visits some of your ongoing projects.

Compare certification bodies for ISO 9001
On this page
  1. Which companies fall under construction for ISO 9001
  2. Certification bodies that may certify ISO 9001 in construction
  3. ISO 9001 certification for a construction company
  4. Project sites in an ISO 9001 audit in construction
  5. Risk class of construction for ISO 9001
  6. Costs of ISO 9001 for a construction company
  7. VCA, BRL and other certificates alongside ISO 9001 in construction
  8. Transferring to another ISO 9001 certification body as a construction company
  9. Comparing ISO 9001 certification bodies for construction

Of the certification bodies that may certify ISO 9001 in the Netherlands, 7 may not certify a construction company. Where can you go as a construction company, then, and what does the auditor look at? After reading this article you will know whether you fall under construction, which certification bodies may certify you, how the audit of your projects works, what your risk class costs and what happens to your VCA if you combine or transfer.

Which companies fall under construction for ISO 9001

For ISO 9001, construction is sector code (IAF code) 28 in the international classification of Global ACI-TECH-3-021 (IAF ID 1). It covers all companies with an SBI code (the Dutch standard industrial classification) that starts with 41, 42 or 43. These are:

  • 41 construction of residential and non-residential buildings, such as homes and commercial premises.
  • 42 civil engineering, such as roads, pipelines and bridges.
  • 43 specialised construction: demolition and earthmoving, installation (electrical, plumbing, heating and air handling), finishing (plasterers, painters, tilers, floor layers) and roofers.

Installation and finishing companies therefore belong to construction, even if they do not call themselves that. A few related companies fall in a different sector. These are architects and engineering firms (code 34), those who make concrete or cement (code 16), those who make metal structures (code 17) and those who install industrial machinery (code 18). Your SBI code is in your registration with the KvK (the Dutch Chamber of Commerce). If you work in several sectors, what goes on your certificate counts. A landscape gardener who does civil engineering works therefore falls under construction for that part.

Certification bodies that may certify ISO 9001 in construction

A certification body may only issue ISO 9001 for the sectors listed in its accreditation. On 24 September 2026 CertificeerWijzer counted 19 certification bodies in the Netherlands that may certify ISO 9001 for construction. That count comes from the Dutch accreditation register and the UKAS schedules:

  • 17 with an accreditation from the Dutch accreditation body for the whole sector.
  • 1 with an accreditation from the Dutch accreditation body that is limited to roofing and renting out construction machinery with an operator.
  • 1 with a British accreditation (UKAS) and an office in the Netherlands.

Of the 26 certification bodies that may certify ISO 9001 in the Netherlands, 7 may therefore not certify construction. With them you do not get an accredited certificate. A request then results in a rejection at most. Which certification bodies they are is listed under the certification bodies.

ISO 9001 certification for a construction company

The process for a construction company is the same as for any other company. You organise your work according to the standard. You let it run for a few months. Then comes the initial audit in two stages. How that works step by step and how long it takes is explained under the steps for ISO 9001.

Two things are different in construction. Schedule stage 2 at a time when projects are under way. The auditor then chooses projects at different stages. That way the auditor sees whether your arrangements also work on the construction site. The description of your work on the certificate (the scope) determines which sector you fall into. It therefore also determines which certification body may certify it. So record in advance which activities are included. Think of "design and construction of non-residential buildings" or "installation of electrical systems".

Project sites in an ISO 9001 audit in construction

In the rules, a construction site is a temporary site. That is a place where you work for a certain period, and which does not become a permanent office. According to Global ACI-TECH-3-004 (IAF MD 5), such a site belongs in the audit programme.

Sample

The auditor visits some of your projects. How many depends on the risk. That is the risk that something goes wrong on the construction site that your system does not catch. Together the projects must show your work. Think of large and small, different types of work and different stages.

Other methods

The certification body may replace some of the visits. That can be done through an interview with you or your client. It can also be done by reviewing project files, or via remote access to your systems or a video connection. The certification body must, however, record why that works equally well.

Extra time

Does the auditor need to visit projects to see whether the work of your office is right? Then that is a reason for more audit time.

On the certificate

Project sites do not have to be on your certificate. Are they on it? Then they must be marked as temporary. The rules for multiple sites apply to this (Global ACI-TECH-3-001, IAF MD 1).

For VCA this is regulated more strictly. The VCA scheme has a fixed table. It gives, for example, 2 visits for 2 to 5 simultaneous projects, and 3 for 6 to 10. For ISO 9001 no such table exists. So ask the certification body how many projects it wants to see.

Risk class of construction for ISO 9001

For ISO 9001, the certification body places your work in one of three risk classes. Construction falls in the middle or the highest. TECH-3-004 gives these examples:

  • Medium risk: simple construction and elements that bear no load, such as a non-load-bearing interior wall. The days from the standard table apply here.
  • High risk: complex construction and load-bearing elements and structures. Days are added here.

Construction does not appear under low risk in the rules. Do you do work in several risk classes, such as a contractor that builds homes and bridges? Then the certification body calculates by the number of people per type of work. The rules do not say where installation work falls. Under high risk they do mention "electrical and gas apparatus". That concerns the manufacture of equipment. For an installer who fits equipment, the certification body decides. The calculation and the reason must be in your contract. So ask which class the certification body chooses and why.

Costs of ISO 9001 for a construction company

A construction company pays for ISO 9001 per audit day. That is the number of audit days times the day rate. The day rate is usually €1,000 to €1,800 per day excluding VAT. The number of days starts from the standard table in TECH-3-004. Your people on the construction site also count in it. That also applies to temporary agency workers and hired-in tradespeople, if they do work covered by your certificate. At medium risk, a construction company with 25 FTE needs 3 days for the initial audit. That is €3,000 to €5,400.

At high risk all amounts are higher. The rules give no maximum. Each extra day in the initial audit costs €1,000 to €1,800. The annual surveillance audit grows accordingly. Extra time is also added for outsourced work. In construction that is quickly a subcontractor. Less time is possible if you do not design yourself. No more than 30% is ever deducted from the table. The days per company size, the calculation and what you control yourself are explained under the costs of ISO 9001.

VCA, BRL and other certificates alongside ISO 9001 in construction

Many construction companies have other certificates alongside ISO 9001, because clients and tenders ask for them. The best known:

  • VCA assesses how you manage safety, health and environment on the shop floor. VCA* is for companies that do the work themselves. They do not engage subcontractors. VCA** is for contractors that do use subcontractors. That also assesses your SHE (safety, health and environment) policy and organisation. The VCA scheme from SSVV describes this.
  • ISO 14001 and ISO 45001 for environment and for healthy and safe working.
  • Safety Culture Ladder from NEN measures how safety-conscious your way of working is. Large clients such as ProRail and TenneT ask for it. Certification here is not yet covered by accreditation.
  • CO₂-Prestatieladder (CO₂ Performance Ladder) from SKAO. It can give you an advantage in tenders.
  • BRLs (beoordelingsrichtlijnen, Dutch assessment guidelines) for a particular product or type of work, such as safe demolition.

Combining at one certification body makes sense if the audits overlap. That gives one schedule and one auditor who knows your company. For ISO 9001, ISO 14001 and ISO 45001 together, according to Global ACI-TECH-3-008 (IAF MD 11), up to 20% fewer audit days are needed. Of the 19 certification bodies for ISO 9001 in construction, 18 may also certify VCA in construction. For a BRL or the ladders, you must check per certification body whether it may issue them. Sometimes it is actually smarter to keep a certificate separate. For example, if a specialist suits your BRL better. How the reduction and scheduling work is explained under combining standards.

Transferring to another ISO 9001 certification body as a construction company

As a construction company you can transfer your ISO 9001 certificate without starting again. That is possible as long as the new certification body has code 28 in its accreditation. It checks that before the transfer. Is that certification body not allowed to certify your sector? Then it cannot take over your certificate. In construction, 19 certification bodies may certify ISO 9001. Of those 19, one may only do so for roofing and renting out construction machinery with an operator.

If you also have VCA, that certificate can come along. The VCA scheme follows the same rules for transferring (Global ACI-TECH-3-002, IAF MD 2). Want everything with one party? Then choose a certification body that may certify both in construction. Want to keep VCA with your old certification body? That is also possible. You then have two audits with two parties. How the transfer works and when it is not possible is explained under transferring for ISO 9001. A logical moment is your recertification. The transition to ISO 9001:2026 is also such a moment.

Comparing ISO 9001 certification bodies for construction

With 19 certification bodies that may certify ISO 9001 in construction, the quotes mainly differ in three things. These are the risk class, the number of project visits and the day rate. At CertificeerWijzer your request only goes to certification bodies with code 28 in their accreditation. Each of them receives the same information about your projects and your people.

Sources

  1. Global ACI-TECH-3-004 (M) version 1.0, Determination of Audit Time of Quality, Environmental, and Occupational Health & Safety Management Systems (successor to IAF MD 5:2023, in force from 28 August 2026) sys.global-aci.org
  2. IAF MD 5:2023, Determination of Audit Time (predecessor, same text) iaf.nu
  3. IAF ID 1:2023, Informative Document for QMS and EMS Scopes of Accreditation (now Global ACI-TECH-3-021) iaf.nu
  4. Global ACI-TECH-3-001 (M) version 1.0, Audit and Certification of a Management System Operated by a Multi-Site Organisation (successor to IAF MD 1) sys.global-aci.org
  5. Global ACI-TECH-3-002 (M) version 1.0, Transfer of Accredited Certification of Management Systems (successor to IAF MD 2) sys.global-aci.org
  6. Global ACI, IAF and ILAC Document Cross-Reference Table v14.0 sys.global-aci.org
  7. RvA, accredited certification bodies for management systems (ISO/IEC 17021-1) and their scope annexes rva.nl
  8. Global ACI-TECH-3-008 (M) version 1.0, Application of ISO/IEC 17021-1 for Audits of Integrated Management Systems (successor to IAF MD 11) sys.global-aci.org
  9. SSVV, VCA certification scheme 2026/6.1 ssvv.nl
  10. NEN, Safety Culture Ladder nen.nl
  11. SKAO, CO₂-Prestatieladder (CO₂ Performance Ladder) co2-prestatieladder.nl